790780
16
Zoom out
Zoom in
Previous page
1/36
Next page
16
OPERATION
The hob automatically detects pans on the cooking zones. When you turn on the hob
using the on/off sensor (1) and place suitable pan on a cooking zone, the corresponding
display will show "0." If you do not active any of the cooking zones within 20 seconds
the hob switches off automatically.
Pan detector
Pan detector is installed in induction hobs. Pan detector starts heating automatically when
a pan is detected on a cooking zone and stops heating when it is removed. This helps save
electricity.
When a suitable pan is placed on a cooking zone, the display shows the heat setting.
Induction requires the use of suitable cookware with ferromagnetic base (see Table)
Pan detector does not operate as the on/off sensor.
When changing the heat setting, attention should be paid that only one sensor eld at
a time is touched. When two or more sensor elds are touched at the same time, the
appliance ignores the control signals and may trigger a fault indication if sensor elds
are touched for a long time.
When you nish cooking switch off the cooking zone using touch control sensor elds
and do not rely solely on the pan detector.
The ceramic hob is equipped with electronic touch control sensor elds, which are operated
by touching the marked area with a nger.
Each time a sensor eld is touched, an acoustic signal can be heard.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amica PI6544RSTF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amica PI6544RSTF in the language / languages: English as an attachment in your email.

The manual is 0.66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info