794755
23
Zoom out
Zoom in
Previous page
1/28
Next page
23
EMERGENCY PROCEDURE
Every time when emergency situation occurs you should:
switch o󰀨 the working assemblies of the plate
disconnect power supply
call in the service
as some minor faults can be removed by the user in accordance with the be low specied
instructions, before calling the Customer Service please go thro ugh the Table checking
every point.
PROBLEM CAUSE ACTION
1.The appliance is not wor king - power supply failure -check the in-house electric sys tem
fuse, replace if ne ces sa ry
2. The appliance does not re spond to
the entered settings
-control panel has not been swit-
ched on
- switch it on
- sensors have been to uched for less
than one se cond
- touch the sensors for a bit lon ger
- several sensors have been to uched
at the same time
- always touch only one sen sor
(except when switching o󰀨 a hotplate)
3.The appliance does not re spond
and emits a short si gnal
- children lock has been
activated
- switch o󰀨 the children lock
4.The appliance does not re spond
and emits a long si gnal
-improper operation (im pro per sen sors
have been to uched or pro per sensors
have been touched for too short time
- again activate the plate
- covered or dirty sensor (sen sors) - uncover or clean the sen sors
5.The whole appliance swit ches o󰀨 - no settings have been en te red
within 10 seconds from swit ching
the plate on
- again switch on the control panel
and im me dia te ly enter the settings
- covered or dirty sensor (sen sors) - uncover or clean the sen sors
6. One heating zone switches o󰀨,
and ”H” is on the display.
- limited time of operation - again switch on the hot pla te
- covered or dirty sensor (sen sors) - uncover or clean the sen sors
7.Residual temperature in di ca tor is
not lighted although the hot pla tes
are still hot
- power supply fa ilu re, the ap plian-
ce has been di scon nec ted from the
mains
-the residual temperature in di ca tor
will work again after swit ching the
control panel on and o󰀨.
8. Crack in the ceramic plate Danger! Immediately disconnect the ceramic plate from the
mains (fuse) and call the nearest Customer Service Centre.
9. If the fault still remains Disconnect the ceramic plate from the mains (fuse) and call the nearest
Customer Service Centre.
Important!
You are the person responsible for proper condition and operation of the
appliance in your household. If you call the Service for a fault which re-
sulted from improper operation, you will be charged with the costs of the visit
even during the period of warranty. We shall not be held liable for damages
caused by a failure to observe this Manual.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amica PH3200ZT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amica PH3200ZT in the language / languages: English as an attachment in your email.

The manual is 0.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info