794936
20
Zoom out
Zoom in
Previous page
1/24
Next page
20
CHANGING THE DIRECTION OF THE DOOR OPENING
Disassemble the refrigerator/freezer door
1. Use a tool to remove the screw off the hinge cover, and then remove the latter. Insert the communi-
cation line to the hole on the cabinet top (20.1)
2. Use a tool to remove the 4 screws off the upper hinge cover and then remove the latter. Pry up the
door bush and small end cap cover on the door (20.2)
3. Insert the door bush and door communication line into the hole on the door and then put on the
small end cap cover (20.3)
4. Use a tool to remove the 2 screws as shows in the below gure to remove the hole cover on the
cabinet top and get the cabinet communication line out of the hole.Pry up the small end cap cover
on the door and get out the door bush and door communication line (20.4)
5. Insert the door bush into the round hole on the door and then put on the small end cap cover (20.5)
6. Move the refrigerator door upward over 500mm to remove the door (20.6)
7. Use a tool to remove the 3 screws off the middle hinge cover and then remove the middle hinge
(20.7)
8. Move the freezer door upward over 500mm to remove the door (20.8)
9. Remove the adjustable front feet under the lower hinge; use a tool to remove the 4 screws from the
lower hinge and then disassemble the lower hinge (20.9)
10. Door disassembly is nished (20.10)
Assemble the door, lower hinge accessories to the corresponding positions of the other side.
11. Use a tool to get the door bush out as shown in the below gure and assemble it to the correspond-
ing position of the other side (20.11)
12. Use a tool to remove the screws off the stopper ass as shown in the below gure and then assem-
ble them to the other side of the door (20.12)
13. Use a tool to remove the axle and two stoppers on the lower hinge and then assemble them to the
position as shown in the below gure (20.13)
Assemble the refrigerator door and freezer door to the opposite side.
14. Remove the adjustable front foot as shown below by hand and then assemble the lower hinge to the
other side of the cabinet and x the screws by using a tool (20.14)
15. Assemble the shorter adjustable front foot to the lower hinge side and adjust the height of the foot to
make the refrigerator stay in level (20.15)
16. Put on the freezer door and turn the middle hinge by 180O and then assemble it to the other side of
the cabinet; use a tool to screw up the 3 screws to x the middle hinge (20.16)
17. Put on the refrigerator door and assemble the upper hinge to the other side of the cabinet; use a
tool to screw up the 4 screws to x the upper hinge. After that, connect the door communication line
and the cabinet communication line and then put on the upper hinge cover and x it using a screw.
18. Assemble the hole cover to the other side of the cabinet and use a tool to screw up the hole cover
(20.17)
19. Door disassembly is nished here. Figure of door opening from the right (20.18)
20. Figure of door opening from the left (20.19)
EN
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amica FK3216GBDF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amica FK3216GBDF in the language / languages: English as an attachment in your email.

The manual is 2.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info