721546
33
Zoom out
Zoom in
Previous page
1/76
Next page
33
CLEANING AND MAINTENANCE
l Touch MENU again. The display will
ash Pdur.
88 08
l Touch > or < sensors to select the Dura-
tion.
You can select 2.00 (2 hours, 120 mi-
nutes), 2.30 (2.5 hours, 150 minutes) or
3.00 (3 hours, 180 minutes). Once you
have made your choice wait for the aco-
ustic signal which conrms that Duration
has been set.
l Pyrolytic cleaning process will start.
Oven door will be locked.
l “P0.00” is shown on the display when
the pyrolytic cleaning is complete.
80 00
l The doors will be unlocked automatically
when the oven chamber cools down.
When the temperature inside the oven
chamber cools down to 160°C, the door
is unlocked and the door lock indicator
light goes out.
l When door lock indicator light is o, set
the function selector knob in position 0.
l When the door is unlocked and you turn
o the oven, you can open the door and
remove ash with a soft, damp cloth. Re-
place the side rail and other accessories.
Your oven is ready for use.
Important!
When you start the pyrolytic cleaning pro-
cess and inadvertently open the oven door,
the process will stop and door lock indica-
tor will be ashing. To restart the pyrolytic
cleaning turn the selector knob to 0and re-
enter the desired settings.
Cancel the process
Pyrolytic cleaning is an automatic process
that should not be interrupted.
If you need to stop the process, turn the
selector knob to position 0.
Depending on the time when you interrupt the
process (temperature in the oven chamber)
the oven chamber will need to rst cool down
to 160°C before the door is unlocked.
Open the door in emergency
If for some reason the door is not unlocked
automatically, and the oven chamber has al-
ready cooled down, open the door as follows:
l set the function selector knob in position
"Lighting",
l wait for 4 minutes;
l set the function selector knob in position
0 – the oven door should unlock within 10
minutes.
Note. The door will not unlock if the
temperature inside the oven chamber is
above 160°C.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amica EHPC 936 100 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amica EHPC 936 100 E in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Amica EHPC 936 100 E

Amica EHPC 936 100 E User Manual - German, French - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info