620294
22
Zoom out
Zoom in
Previous page
1/32
Next page
22
One of programme indicators lights up and the
Start/Pause indicator ashes
The dishwasher door is open — close the
door.
If the programme won't start
Make sure the plug is properly inserted into
the wall outlet.
Check the fuses in the electrical system
Make sure that the water supply valve is open.
Make sure that the door is closed.
Make sure that the dishwasher is turned off by
pressing the On/Off button.
Make sure that the water supply lter and dish-
washer lters are clean.
If the indicators do not go out after washing
You did not press the On/Off button.
If the there is residue detergent in the dis-
penser
Detergent was added to wet dispenser.
If there is water in the dishwasher when pro-
gramme completes
Water drain hose is clogged or kinked.
ERROR CODES AND TROUBLESHOOTING
The lters are clogged.
The programme not yet completed.
The dishwasher stops during a washing pro-
gramme
Power failure.
No water supply;
The program can be paused.
You can hear clinking noises inside the appli-
ance
The dishes are arranged incorrectly.
Spray arm hits the dishes.
If food residue remains on the dishes
Dishes are improperly loaded into the dish-
washer and the water does not reach every-
where.
Basket overloaded.
The dishes touch one another.
A very small amount of detergent was added.
Unsuitable, gentle washing programme se-
lected.
Spray arm clogged with food residue.
Clogged lters.
Filters improperly tted.
Drain pump clogged.
If white spots or streaks appear on the dishes
Very small amount of detergent was added.
Low dose of rinse aid.
You are not using special salt, in spite of the
Programme indicators:
a) all indicators off — standby
b) one programme indicator lights steady — programme paused pause or waiting to start the
programme
c) one indicator ashing — programme in progress, the appliance operates
d) an indicator is ashing fast — error (see the following table)
ERROR CODE DESCRIPTION OF THE
FAULT ACTION
E1 Water supply timeout
• Closed water valve.
• Clogged water pipe
• Water pressure too low
• If error persists contact customer
service.
E4 Overow
• Water level too high
• If error persists contact customer
service.
E8 Manifold valve failure • Contact customer service.
E9 Error sensor
• Dirty sensor control (must be clean)
• If the error persists, contact your
service.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amica EGSP 64501 V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amica EGSP 64501 V in the language / languages: English as an attachment in your email.

The manual is 3,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Amica EGSP 64501 V

Amica EGSP 64501 V User Manual - German - 32 pages

Amica EGSP 64501 V User Manual - Dutch - 32 pages

Amica EGSP 64501 V User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info