721512
17
Zoom out
Zoom in
Previous page
1/68
Next page
17
OPERATION
Preview and modify settings during oven
operation
Touch once to check the temperature inside
the oven cavity. Touch again to check the
set temperature. Touch again to displaying
the current time.
To adjust the set temperature, touch and
hold and the currently set temperature will
be displayed. Use the +/– knob to adjust
it as needed. Touch to conrm the new
temperature. The new temperature is not set
until conrmed.
Use the function selector knob to change
the function at any time. When you conrm
the new function, the temperature will be
displayed (currently set temperature, not
the default temperature for a given oven
function). To adjust temperature, touch and
hold and set a new temperature using the
+/– knob. Touch to conrm and the appli-
ance will operate with the new settings.
End oven function
Set the function selector knob to “0” to end
any function. By default the oven functions
operate indenitely, but you can set the oven
to turn o using timed operation function of
delayed timed operation function. The only
exception is the pyrolytic cleaning function,
which cannot be modied.
Timed operation
In this mode the oven will turn o after a set
duration. You can set the duration from 1
minute to 10 hours. To set timed operation
for any oven function, touch and hold the
sensor, and the timer symbol ashes in
the display. Touch the sensor again, the
display will show the symbol. Now you can:
Set the Duration by turning the +/– knob
(clockwise), then touch to conrm.
Adjust the Duration as need using the
+/– knob (in either direction). Touch
to conrm the adjusted setting.
To cancel timed operation use the +/–
knob to adjust duration down to and
touch to conrm.
Timed operation will interrupt the active oven
function. When the set Duration has elapsed,
you will hear beeping. Touch any sensor or
open the door to mute the beeping. When
the beeping is muted the appliance will go
into stanby.
Delayed timed operation
You can set the oven to start at a specic time
and operate for a set Duration. You can delay
the oven start from 1 minute to 23 hours 59
minutes, and set the Duration for up to 10
hours. To activate the delayed timed opera-
tion, rst set the timed operation. Then touch
and hold the sensor again and the timer
symbol will ash on the display. Touch the
sensor twice, and the pictogram will ash
on the display. Now you can:
Use the +/– knob (clockwise) to set the time
when oven needs to start, then touch to
conrm.
Adjust the time as needed using the +/– knob
(in either direction). Touch to conrm the
adjusted setting.
To cancel timed operation use the +/– knob
to adjust duration down to and touch
to conrm.
Timed operation will interrupt the active oven
function. When the set Duration has elapsed,
you will hear beeping. Touch any sensor or
open the door to mute the beeping. When
the beeping is muted the appliance will go
into stanby.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amica EBX 944 600 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amica EBX 944 600 E in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Amica EBX 944 600 E

Amica EBX 944 600 E User Manual - German, French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info