609225
20
Zoom out
Zoom in
Previous page
1/80
Next page
OPERATION
20
Fast oven cavity heat-up.
When you select the heating function and
temperature the fast heating function be-
comes available. You can use it until the set
temperature is reached.
When you touch fast heat-up sensor the
symbol is shown. When the set temperature
is reached the symbol goes out, and the
oven lights up for 30 seconds and you hear
the [fast heat-up end] alarm. The selected
heating function is resumed and set tem-
perature is maintained.
Fast heat-up and timer.
A) Set Timer before you use fast heat-up:
- if you only set duration, fast heat-up starts
immediately;
- If you set Duration and End Time, fast heat-
up starts at the beginning of the programme,
however the symbol is shown immediate-
ly until the set temperature is reached.
Using fast heat-up does not affect Duration.
B) Set Timer (touching ) when you are us-
ing fast heat-up — fast heat-up is paused
until you set the timer. When you set the
timer the function continues normally as in
item A).
Meat probe*
If you plug in the meat probe before select-
ing the heating function, you can set the
meat probe immediately after setting the
oven function.
You can connect the meat probe at any
time. The symbol will be shown and 80°C
default value will ash on the temperature
display. Touch or to adjusttempera-
ture and then touch OK to confirm. T h e
oven continues to use the previous settings
untilyouconrmmeatprobesetting(ifyou
unplugthemeatprobebeforeconrmingthe
temperature, the oven resumes the previous
mode). Activating the meat probe does not
change the oven temperature settings.
When you conrm meat probe setting, the
oven will keep the set temperature until the
desired meat probe temperature is reached.
Then the heat is turned off and you will hear
[end]beep.
Unplugging the meat probe during operation
(afteryouconrmthemeatprobetempera-
ture) will cause an error (meat probe might
be damaged). You will hear a beep and the
programme will be terminated.
Meat probe and timer:
If you simultaneously use meat probe and
timer, the oven continues to operate until
therstconditiontoendtheprogramme is
met, i.e. until the meat probe temperature is
reached or duration has elapsed.
*optional
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amica EB 1020 TZTPR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amica EB 1020 TZTPR in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Amica EB 1020 TZTPR

Amica EB 1020 TZTPR User Manual - German, French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info