537889
4
Zoom out
Zoom in
Previous page
1/18
Next page
De Comfortcontrol 8b is geschikt voor elke CV-installatie, zowel als stadsverwarming,
vloerverwarming en heteluchtverwarming. Ook Combi-, Gaswand- of HR/VR-ketels en
eventuele aangesloten pompschakelaars (natuurlijk de Amframatic F1) of de meest
voorkomende weersafhankelijke CV-regelingen (Amfra Meteo) vormen geen enkel bezwaar
voor de Comfortcontrol 8b.
Monteren en installeren van de Comfortcontrol 8b
Schakel de netspanning van uw CV-installatie uit door de stekker uit het stopcontact te halen.
Open de Comfortcontrol 8b door met een schroevendraaier het kunststof lipje (onder het
LCD) iets naar binnen te drukken. U kunt nu het Comfortcontrol 8b-huis haar boven laten
scharnieren, en los haken van de onderplaat.
230 Volt of 24 Volt aansluiting?
In de meeste gevallen zal een thermostaataansluiting een 24 Volt (AC/DC) zijn, maar het
komt ook voor dat de thermostaataansluiting een 230 Volt aansluiting betreft. Het maakt voor
de Comfortcontrol 8b echter helemaal niets uit wat voor spanning er op de schakelcontacten
gezet wordt, zolang dit maar tussen de 0 V en 250 V(AC) ligt met een maximale
stroomsterkte van 5 Ampère (AC).
Steek de aansluitdraden door de onderplaat en schroef de onderplaat vast op de muur.
Sluit de twee aansluitdraden aan, het maakt niet uit welke draad op welk punt wordt
bevestigd.
Haal het weekprogramma kaartje uit het Comfortcontrol 8b-huis.
Monteer het Comfortcontrol 8b-huis. (van boven inhaken en van onderen dichtklikken)
Lees nu over de speciale opstart-instellingen op pagina 13.
Aanbrengen van batterijen
Met munt of schroevendraaier het doorzichtige batterijdeksel opwippen.
Batterijen inleggen volgens tekening op de bodemplaat.
Programmakaartje aanbrengen, batterijdeksel met lengte lipjes inhaken en aan de
andere kant aandrukken.
Na het inleggen van de batterijen verschijnt binnen enkele
seconden de insteltemperatuur, in 1 decimaal nauwkeurig
(214 is 21,4°C). U kunt nu, middels de stelschroef aan de
rechterkant van het apparaat, deze insteltemperatuur
verstellen tot dat deze de (gemiddeld) heersende temperatuur
in de ruimte aangeeft.
Wacht wel ongeveer 1 minuut totdat de gemeten temperatuur
zich heeft ingesteld, alvorens deze reeds in de fabriek
gecalibreerde temperatuur aan te passen.
Na het instellen drukt u 2x op de knop [ON/OFF].
Het apparaat staat nu op [MANUAL] en is gereed voor gebruik.
Indien u het opstart/calibratieprogramma niet handmatig onderbreekt, schakelt de
Comfortcontrol 8b na 5 minuten automatisch door naar de zomerstand.
3
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amfra Comfortcontrol 8b at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amfra Comfortcontrol 8b in the language / languages: Dutch as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info