603203
11
Zoom out
Zoom in
Previous page
1/17
Next page
musical instruments with stereo outputs such as Rhythm Machines or Samplers should also be con-
nected to LINE inputs. Turntables should only be connected to “Phono” inputs. The red colored RCA
jack represents the right channel input and the white represents the left channel input.
23. REC OUT - This is a low current unbalanced output source designed for various tape and CD
recorders. The Record Out (REC OUT) level is dictated by the CHANNEL FADER LEVEL (9), it is not
influenced by the MASTER VOLUME CONTROL (4).
24. RCA MASTER OUTPUTS - The Master Output includes a pair of RCA UNBALANCED JACKS (24).
The RCA jacks send a low current unbalanced output signal.
25. BALANCED XLR MASTER OUTPUTS - The Master Output includes a pair XLR Balanced
JACKS as well as a pair RCA UNBALANCED JACKS (24)
. The 3-pin XLR jacks send a high current
balanced output signal. These jacks should be used when you will be driving an amp or other audio
equipment with a balanced input, or whenever you will be running a signal line greater than 15 feet.
Always, use these jacks whenever possible.
26. 9V AC INPUT - Connect the included power supply to this input, or any other 9v power adapter.
27. MAIN POWER SWITCH - This is the main power ON/OFF button. An L.E.D. located on the front
of the mixer will glow green when the power is ON. Before main power is applied, be sure you have
made all connections to the mixer. Also be sure your amplifier(s) is(are) tuned off. Remember to avoid
damaging pops, the mixer should be powered on first and turned off last.
Q-D6™ Controls and Features Cont.
©American Audio® - www.americanaudio.us - Q-D6™ Instruction Manual Page 11
2829
28. HEADPHONE OUTPUT JACK - This jack is used to connect your headphones to the mixer allow-
ing you to monitor the cue source. Use headphones only rated at 8 ohms to 32 ohms. Most DJ head-
phones are rated at 16 ohm, these are highly recommended. Always be sure the CUE LEVEL VOLUME
(5) is set to minimum before you put the headphones on.
29. MICROPHONE CONNECTOR - This jack is used to a connect a microphone to the mixer. Con-
nect you microphone via 1/4 inch (6.3mm) jack. The signal volume will be controlled by the MIC LEVEL
(13). The bass and treble levels can also be adjusted by the built-in MICROPHONE EQ (13).
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for American Audio Q-D6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of American Audio Q-D6 in the language / languages: English as an attachment in your email.

The manual is 3,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of American Audio Q-D6

American Audio Q-D6 User Manual - German - 20 pages

American Audio Q-D6 User Manual - Dutch - 20 pages

American Audio Q-D6 User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info