603204
9
Zoom out
Zoom in
Previous page
1/22
Next page
©American Audio® - www.AmericanAudio.com - Q-2422 PRO User Instructions page 9
Q-2422 PRO FRONT PANEL - CONTROLS AND FUNCTIONS CONT.
each channel. Each channel may only be assigned one input source at a time. This switch must be in
the “phono” position for turntable operation.
4. PAN CONTROL - The balance control for each channel, or how much left and right signal is sent
to the left and right MASTER OUT JACKS (36).
5. CHANNEL GAIN CONTROL - This adjustment is used to adjust the audio source signal input gain
for a channel. Never use the gain control to adjust a channels output volume. Setting the gain level
properly will ensure a clean output signal. An improper gain level adjustment will send a distorted
signal throughout the entire audio line which may damage speakers and amplifiers. To properly set a
channels gain level control:
1. Be sure the MASTER VOLUME CONTROL (
17) is set to level 4.
2. Set the CHANNEL FADER (
23) to level 8.
3. Begin playback on an audio source connected to the channel you are adjusting.
4. Use the Gain Control to adjust an average output volume of +4 dB
.
5. Repeat this step for all channels
6. CHANNEL EQ SECTION -
CHANNEL TREBLE CONTROL - This knob is used to adjust the treble levels of a channel
allowing for a maximum treble gain of +12dB or maximum decrease of -30dB. Turning the knob in a
counter-clockwise direction will decrease the amount of treble applied to a channel signal, turning the
knob in a clockwise direction will increase the amount of treble applied to a channel signal.
CHANNEL MIDRANGE CONTROL - This knob is used to adjust the midrange levels of a chan-
nel allowing for a maximum midrange gain of +12dB or maximum decrease of -30dB. Turning the knob
in a counter-clockwise direction will decrease the amount of midrange applied to a channel signal,
turning the knob in a clockwise direction will increase the amount of midrange applied to a channel
signal.
CHANNEL BASS CONTROL - This knob is used to adjust the low frequency levels of a channel
allowing for a maximum bass gain of +12dB or maximum signal decrease of -30dB. Turning the knob
in a counter-clockwise direction will decrease the amount of bass applied to a channel signal, turning
the knob in a clockwise direction will increase the amount of bass applied to a channel signal.
7. CHANNEL VOLUME LEVEL INDICATORS - The LED indicators that run along each channels EQ
section are used to measure incoming signal levels. Use these indicator to visually maintain an average
signal output of +4dB. A consistent average output level of +4dB will produce a clean output signal.
8. MASTER VOLUME LEVEL INDICATORS - The dual MASTER LEVEL LED indicators are used to
detail the master fader output level. The meters will detail the output level of both the left and right
channels.
9. MASTER OUTPUT BALANCE CONTROL - This knob is used to control the pan, adjust how much
of the signal is sent to the left and right output level. For true stereo imaging, maintain the knob in the
12 o’ clock position.
10. AUX 3 INPUT JACK -
This Aux input is for the use of a Mp3 player, or XM or Sirius satellite raido.
Input volume will be controlled by the channel three
fader.
11. BNC JACK - This jack is used to supply a 12V DC signal to a gooseneck light, such as the
American Audio
® GNL-14.
12. POWER SWITCH - This is the main power ON/OFF button. A blue LED next to the power switch
will glow when power is ON. Before you turn the power on be sure you have made all connections to the
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for American Audio Q-2422 PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of American Audio Q-2422 PRO in the language / languages: English as an attachment in your email.

The manual is 3,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of American Audio Q-2422 PRO

American Audio Q-2422 PRO User Manual - German - 24 pages

American Audio Q-2422 PRO User Manual - Dutch - 24 pages

American Audio Q-2422 PRO User Manual - French - 24 pages

American Audio Q-2422 PRO User Manual - Spanish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info