Manual Amec Cypho-101 (page 10 of 48) (English)

521965

Zoom out

Zoom in

1/48

1.5 Important Notice

The intended use of the AMEC CYPHO-101 Series Automatic Identification System Receiver is

to enhance the safety of vessels at sea. However, a few points must be addressed:

 Under certain regulations, some specified vessels are compulsory to be installed with AIS.

However, this does NOT mean that all vessels will be equipped with ones. Any AIS will NOT

guarantee to monitor and to receive signals from every ship in the surroundings.

 AIS acts as aids to navigation in the purpose of decreasing or preventing the possibility of

vessel collision. It is not navigational equipment and does not replace any navigational

system installed on board.

 Although an AIS Receiver is operated automatically by itself, the owner or the crew on the

vessel is suggested to maintain a proper look-out for the surroundings. While the AIS is

capable of setting alarm of Distance to Closest Point of Approach (hereinafter called “CPA”)

and Time to the Closest Point of Approach (hereinafter called “TCPA”), vessel owner or the

crew should be aware of the fact that such action will not apply on the vessels that are not

equipped with AIS.

 Please keep the device at least 3.3 ft (1 m) away from the ship’s navigation compass.

 This product is a marine AIS receiver intended for worldwide use abroad NON SOLAS

vessels.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Amec Cypho-101 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Amec Cypho-101 Manual

Product: