495953
6
Zoom out
Zoom in
Previous page
1/14
Next page
6
POSITIONING
GB
Installing Exhaust Hose to Window Slide Bar
Note: The window kit is only designed to be installed with sliding windows or doors.
The window kit is not designed or to be used with casement style windows.
Step 1:
Measure your window kit according to the dimensions of your sliding window. If in case the unit is larger than
your required dimensions, it can be cut using a saw or power tool of the sort. If the unit is too short for your
opening, you can order an additional window kit from our online store to extend it.
Step 2:
Screw slide bar connector into exhaust hose rst (Figure A) , then spin the
exhaust hose into the air outlet located
at the rear of the unit (counter-clockwise) (Figure B).
Step 3:
Insert slide bar connector into adjustable slide bar (Figure C). Extend the Slide Bar length to match the
width of the window (vertically or horizontally), and then tighten the screw to hold the length of the slide bar
(Figure D). Make sure the adjustable slide bar ts snug in your window and stays in place.
Proceed to close and lock your window on the Slide Bar to secure in place (Figure E).
IMPORTANT
The exible exhaust hose can be extended from 10.25" to 58.5" for mounting.
We recommend that you keep the hose as short as possible to minimize possible loss back in the room.
This
length has been designed especially according to the speci cations of the air conditioner.
Do not use an extension or exchange for a different hose as that may lead to malfunctioning.
The exhaust air must ow freely. Any blockage can lead to overheating of the air conditioner.
Handle with care to prevent any kink or bend in the exhaust hose.
This unit can easily be moved from one room to another. In doing, so keep this in mind:
The air conditioner must stand upright on an even surface.
Do not position near bath, sink, or other permanent, wet or damp area.
Keep unit at least 18" from wall, curtain
s, draperies, or heat sources to insure adequate air circulation.
18"
45cm
18"
45cm
Exhaust
Hose
Exhaust
Hose
Slide Bar
Connector
Slide Bar
Connector
Window
Adjustable
Slide Bar
Adjustable
Slide Bar
Fasten
one screw
Air Outlet
Figure A
Figure B
Figure C
Figure E
Figure D
6


Need help? Post your question in this forum.

Forumrules
1

Forum

amcor-sf10000e

Reset search

  • Water constantly running from unit - have to keep a tray under outlet Submitted on 13-8-2020 at 18:09

    Reply Report abuse
  • The plug is getting very very hot when the air on unit is plugged in and becoming a concern - how do I get it fixed? Submitted on 25-6-2020 at 23:05

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amcor SF10000E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amcor SF10000E in the language / languages: English as an attachment in your email.

The manual is 5,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info