453930
5
Zoom out
Zoom in
Previous page
1/8
Next page
310
Before Use
Important!
Leave the unit in an upright position for at least 2 hours before use.
• Always place the unit on an even surface.
• The power cord has a built-in A.F.C.I. (Arc Fault Circuit Interrupter) circuit breaker
for added safety. If the power supply is interrupted, please press the reset
button to reconnect the unit to the power source. The green light should be on.
• Make sure the unit is connected to a correctly grounded power supply.
For proper operation, the unit must be vented to the outside.
Do not cover or obstruct the appliance inlet or outlet grilles.
• To avoid the risk of shock, the product should never be used in bathrooms, shower rooms
or in any other steamy or wet areas.
Always transport the unit in an upright position.
Do not sit or stand on the unit.
Do not place objects on the unit.
• Do not touch the unit with wet/damp hands or when standing barefoot.
Drainage of the water container is required before moving the unit or
putting it into storage.
If the electric socket is different from the plug provided, have a professionally qualified
electrician replace the outlet with a suitable one. Avoid the use of adaptor plugs, multiple
sockets and/or extension cords; if their use is necessary, ensure that they conform to the
current safety regulations.
Do not pull the power cord or place it near a source of heat; always unroll it completely
to avoid the possibility of dangerous overheating.
If the power cord is damaged, it must be replaced by a qualified person.
THE MANUFACTURER DISCLAIMS ANY RESPONSIBILITY IF THE ABOVE
INSTRUCTIONS ARE NOT FOLLOWED.
Remote Control
To Operate the Remote Control:
Insert batteries by pulling down on front cover (See fig. 1).
Be sure the remote is pointed at the unit at all times.
1. To Set the Clock:
Press the TIME button for 3 seconds.
The hour digits will fl ash. Press UP or DOWN to adjust the hour.
Press the TIME button. The minute digits will flash.
Press UP or DOWN to adjust the minutes.
Press the TIME button when fi nished.
2. To Turn Unit ON:
Press the ON / OFF button
3. To Adjust TEMPERATURE:
Adjust temperature using the UP / DOWN buttons
4. To Adjust FAN SPEED:
Press FAN button to select speed.
5. To Set the TIMER:
A. SET START TIME
Press timer ON button and set the ON hour using
the UP and DOWN buttons.
Press timer ON button and set the minutes using
the UP and DOWN buttons.
Press timer ON to finish.
B. SET OFF TIME
Press the timer OFF button and set the Off hour using
the UP and DOWN button.
Press the timer OFF button and set the minutes using
the UP and DOWN buttons.
Press timer OFF to finish.
6. To Set SLEEP MODE:
Make certain unit is operating in Cool Mode.
Set the desired starting temperature.
Press SLEEP MODE button.
10:09
72
F°
ON/OFF UP
FAN DOWN
CLOCK
SLEEP MODE
fig.1
Slide
Cover
Down
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amcor PLM12000EH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amcor PLM12000EH in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info