672110
6
Zoom out
Zoom in
Previous page
1/16
Next page
9
This portable AC features the
Innovative AutoDrain NanoMist Technology
Very little excess water should accumulate. During the process of
cooling, some of the water accumulated is actually used to cool the
unit internally, making it run more ef ciently. Both this evaporative
technology and Innovative AutoDrain NanoMist Technology™ are
features not found in most portable air conditioners.
Switch off the unit and remove the plug from the outlet.
Position a fl at container or dish on the fl oor under the drain hole.
Do not allow the water to drip continuously into the
container as it might easily over ow.
Remove the drain knob.
Remove the rubber plug, the water will fl ow in the
container. When this is nearly full, replace the plug to
stop the water fl ow and empty it. Repeat this process
until all water has been removed.
Replace the rubber plug into the drain hole fi rmly,
the
WATER FULL LED should not fl ash any longer.
Replace the drain knob.
Rubber plug Drain knob
Emptying The Water Container
10
Always unplug the unit from the power supply (wall outlet) before
beginning the cleaning.
Housing
Use a soft, damp cloth to wipe the body clean. Never use strong
chemicals, oil-based products, detergents, chemically treated cloths or
other cleaning solutions. These could possibly damage the housing.
Filter
Use a vacuum cleaner or tap the fi lter lightly to remove loose dust
and dirt from the fi lters and then rinse them thoroughly under running
water (not warmer than 104°F).
Dry thoroughly before replacing.
Notice! Never operate the air conditioner without the fi lters.
It is recommended to replace an active
carbon fi lter at the start of the season.
Remove the top fi lter frame from
the unit by pulling it out.
Separate the fi xer from the fi lter frame.
Insert the active carbon fi lter into the
lter frame, underneath the tabs.
Re-fi t the fi lter frame inside the unit.
Cleaning
Installation of Carbon Filter
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amcor NanoMax series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amcor NanoMax series in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info