672036
9
Zoom out
Zoom in
Previous page
1/12
Next page
It is important that you read
these instructions before using
your new purchase and we strongly
recommend that you keep them
in a safe place for future reference.
Owners
Manual
Model LAP-1
by
3119753
1
Table of Contents
THANK YOU …………………………………………………… 2
A WORD ABOUT THE LAP-1 ………………………………… 3
Safety Issues ………………………………………………… 3
FEATURES AND BENEFITS ……………………………………… 4
PLACEMENT OF THE LAP-1 AIR PURIFIER …………………… 4
HOW THE AIR PURIFIER WORKS ……………………………… 5
Setting the Fan Speed ……………………………………… 5
Timer Operation …………………………………………… 5
CLEANING AND MAINTENANCE ………………………… 6-7
SPECIFICATIONS ……………………………………………… 8
WARRANTY ……………………………………………………10
2
Thank You!
Thank you for purchasing an LYSOL Air Purifier.
We would like you to enjoy the many benefits this unit offers, so please read this manual carefully
and take full advantage of the many advanced features that your Lysol Air Purifier offers you.
In designing these advanced products, we have listened carefully to our customers and have
passed their views on to our research and development laboratories.
We wish you many years of enjoyable use.
After reading this manual, please keep it in a safe place for future reference.
Energy Saving Tips
Do not locate the Air Purifier where furniture or other objects can obstruct the airflow.
Follow the maintenance instructions in order to keep the filters clean
When Unpacking Your Air Purifier
Open rear door and remove cardboard insert
3
A Word About the LAP-1
This manual has been prepared to acquaint you with the proper installation, operation and
maintenance of your LAP-1 Air Purifier. We urge you to read this publication carefully and to follow
the recommendations to help assure the most enjoyable and trouble free operation of your Lysol unit.
When it comes to service, remember that Lysol knows its product best.
Please do not attempt to open, repair and/or clean any of the internal parts of the LAP-1 Air Purifier
yourself. This could result in loss of the warranty.
We would like to take this opportunity to thank you for choosing this Lysol product, and to assure you
of our continuing interest in your comfort, pleasure and health.
Safety
The LAP-1 Air Purifier is safe. It is listed by ETL and it has been designed with special attention
to safety. However, as with other electrical appliances, use it with care.
Do not clean the LAP-1 Air Purifier by spraying it or immersing it in water.
Do not insert any object into the openings of the LAP-1 Air Purifier.
Disconnect the product from the electrical outlet before cleaning the unit or any of its components.
Do not connect the LAP-1 Air Purifier to an electric outlet using an extension cord.
If there is no accessible outlet, a licensed electrician should install one.
WHEN NOT IN USE STORE OUT OF REACH OF CHILDREN!
Warning
Any service, other than regular cleaning, filter replacement, or lamp replacement should be performed
by an authorized service representative. Failure to do so could result in loss of warranty.
To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider
than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not fit, contact qualified personnel to install the
proper outlet.
Do not alter the plug in any way.
If the supply cord becomes damaged, it must be replaced by the manufacturer or its service agent
or similarly qualified person in order to avoid a hazard.
4
Features and Benefits
High performance air purifier for large areas and extended use.
Electronic Control
Three Speeds
A timer that allows the user to operate the unit continuously, or at 1, 2, 4, or 8 hour increments
Quiet Operation
Mesh pre-filter
Electrostatic filter captures even the smallest airborne particles
Granulated Active Carbon Filter
Two PCO (Photo Catalytic Oxidation) filters working in conjunction with a UV lamp to
kill bacteria, viruses and reduce odors.
Placement of the LAP-1 Air Purifier
Attention: Before deciding on a location for your LAP-1 Air Purifier,
carefully read all the operating instructions as well as all the following information.
1. Do not place this unit in close proximity to electronic devices that are sensitive to electrical fields.
2. Do not place this unit on any electrical device.
The LAP-1 Air Purifier may be placed on the floor, nightstand, table or desk with
its air outlet facing the user in order to allow proper air flow.
Control Panel and Remote Control Operation
1. Plug the unit into a 120V mains outlet and press the
POWER (A) button. The unit will start operating in the lowest speed.
The UV lamp will be on. Note that these are always the initial
conditions when the unit has been disconnected from the
120V mains power. If the unit is turned off while having remained
connected to power, it will turn on with the same UV lamp setting
as when it was turned off.
The speed setting will also be kept, if the unit is turned on with
the TIMER (B) button or Remote Control.
2. With each press on the POWER (A) button, the unit will
cycle through the following sequence:
Speed 1 (Lowest speed), Speed 2, Speed 3, Off, Speed 1
The selected speed will be indicated by the green light next
to the “1, “2”, or “3” printing.
4. With each press on the UV (C) button, the UV lamp will cycle on and off.
When the UV lamp is on, the green light next to the UV (C) button is lit.
5. The Timer functions, which are controlled by the TIMER (B) button, are as follows:
a. With each press on the TIMER (B) button, the Timer will cycle through the following sequence:
1 hr, 2 hrs, 4 hrs, 8 hrs, Timer off (but the unit keeps operating), 1 hr
The selected Timer interval (in hours) will be indicated by the
green light next to the “1, “2”, “4” or “8” printing.
b. The unit will operate for the selected Time interval (1 hr, 2 hrs, 4 hrs or 8 hrs)
and then turn off the unit. After the appropriate time period has passed the green
light will move to the next lower position in order to show the remaining time.
6. The Remote Control turns the unit on and off (see point 1 above).
For long operating distance the Remote Control should be pointed at the
area just below the POWER (A) button.
5
How the Air Purifier Works
The internal construction and filtering
stages through which the air passes
inside the LAP-1 are illustrated in Fig. 1
C: UV
B: TIMER
A: POWER
Fig. 1
Control Panel
Remote Control
6
Cleaning and Maintenance
Always disconnect the unit from the electrical outlet prior to cleaning or servicing the unit!
Note that the servicing intervals mentioned in this section are based on air purifier use of 12 hours per
day in a normal household environment. If your use of the air purifier differs from that described above,
then you can adjust the servicing intervals accordingly.
1. Clean the outside of the LAP-1 and the area around the air purifier with a soft damp cloth
once every month.
2. Access to the LAP-1 filters and serviceable components is by removing the rear cover.
To remove the rear cover, push the button above the rear cover while pulling back on the rear
cover. The rear cover will pivot away from the main unit and then it can be lifted up and away.
The rear cover is reinstalled by fitting the projection at the bottom of the rear cover into the
slot at the back of the main unit and then closing the top of the rear cover until it snaps into place.
3. The Pre-Filter is removed from the rear cover, by sliding it out the upper edge of the rear cover.
The Pre-Filter is reinstalled by sliding it back in the slot from where it was removed.
The Pre-Filter should be washed in warm soapy water or with a water spray once a month.
Make sure that the Pre-Filter is completely dry before reinstalling it.
4. The Granulated Active Carbon Filter is visible looking at the open back side of the main unit.
Remove the Carbon Filter by pulling on the ribbon attached to its top edge.
The Carbon Filter will thus detach the Velcro strips that hold it to the Filter Cassette.
Granulated Active carbon Filter should be replaced once a year.
If the Granulated Active Carbon Filter is dusty, it can be cleaned gently with a vacuum cleaner.
7
Cleaning and Maintenance
5. Remove the Filters Cassette by lifting the tab above the electrostatic filter and then by pulling
backwards towards the user on the upper part of this filter. Note that the Filters Cassette, the
Electrostatic Filter and the Rear PCO filter make one inseparable unit.
Filters Cassette is reinstalled by fitting the bottom of the Filters Cassette into its place at the back
of the main unit and then closing the top of the Filters Cassette until it snaps into place.
a. The filters Cassette should be washed in warm soapy water once a month. Make sure that the
Filters Cassette is completely dry before reinstalling it into its place at the back of the LAP-1.
b. While the Filters Cassette is out of the unit the interior of the unit should be wiped
with a soft dry cloth.
6. The UV lamp is visible looking at the open back side of the main unit after the Filter Cassette has
been removed). The UV lamp is removed by rotating it 1/4 turn and then sliding it out of the top
and bottom lamp sockets.
The UV lamp is reinstalled by sliding it into the top and bottom lamp sockets and
rotating it 1/4 turn. The UV lamp should be replaced once a year.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amcor LAP-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amcor LAP-1 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info