733757
23
Zoom out
Zoom in
Previous page
1/42
Next page
21
User’s manual
EN
USE AND OPERATION
OBLIGATIONS FOR USE
Important
-
When using the robot for the rst time, please read the manual carefully and make sure you have
understood it completely; in particular, all the information on safety.
-
The product must only be used for its intended purpose as described by the Manufacturer. Do not
tamper with any device to obtain different operating performances.
-
Avoid using the robot and its peripherals in bad weather conditions especially when there is a risk of
lightning.
DESCRIPTION OF ROBOT COMMANDS
The illustration shows the position of the control functions on the
machine.
A. DISPLAY: lights up to show all the functions.
B. ON: press to turn on the lawnmower.
C. OFF: press this key to stop the robot, the display turns off.
D. PLAY/PAUSE: press to stop the mower, leaving the display
on “stand-by”; in this way, the mower can be programmed.
Press again to restart the mower. If the key is pressed while
the mower is charging, the mower does not resume working
until it is pressed again and the word “PAUSE” disappears from
the display.
E. HOME/WORK: press this key to allow the mower to return to
its station and, consequently, to start recharging the batteries.
If pressed while the robot is being charged, the robot interrupts
the charging cycle and starts operating again.
ENTER
ON PLAY
PAUSE
HOME
WORK
OFF
“ON” KEY (B)
(G) “ENTER” KEY
• THIS KEYBOARD IS ONLY AN EXAMPLE
“OFF” (C) KEY
“HOME/WORK” (E) KEY
“PLAY/PAUSE” KEY (D)
“ – ” (H) KEY
“ + ” (F) KEY
DISPLAY (A)
“STOP” KEY (I)
“STOP” KEY (I)
F. “+” KEY: during operation, press this key to restart the blade which was previously stopped. During programming, press this
key to increase the values shown in the menu.
G. ENTER: during operation, press this key to turn on the spiral function. During programming, press to conrm and memorise
the selection.
H. “-” KEY: during operation, press to stop the blade. During programming, press to decrease the values shown in the menu.
I. STOP: press to stop the mower safely. Only use in case of imminent danger and to perform maintenance on the robot.
MENU ACCESS
The robot functions can be programmed via the different functions of each menu. The table reports the list of menus available
with the relative functions.
To program the robot, proceed as follows:
lift the display protection;
press the ON key and wait a few seconds for the robot to turn on completely. Enter the password (if prompted) (See
“Password Entry”). Press “Enter” if the information messages remain on the display;
if the robot is turned on when inside the charging station, after a few seconds the message “CHARGING”appears on the
display, then press the “PLAY/PAUSE” key;
the “PAUSE” function now appears on the display;
press the ENTER key. This allows entering into programming menu and the “SETTINGSfunction appears on the display.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ambrogio L85 Elite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ambrogio L85 Elite in the language / languages: English as an attachment in your email.

The manual is 5,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ambrogio L85 Elite

Ambrogio L85 Elite User Manual - Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info