733750
23
Zoom out
Zoom in
Previous page
1/31
Next page
23
User’s manual
EN
ORDINARY MAINTENANCE
MAINTENANCE RECOMMENDATIONS
Important
During maintenance operations, use personal protection equipment indicated by the Manufacturer, especially
when working on the blade. Before carrying out any maintenance, make sure the robot is turned OFF (see
“Robot Safety Stop”).
SCHEDULED MAINTENANCE TABLE
Frequency Part Type of maintenance Reference
Weekly
Blade
Clean and check the
efciency of the blade. If the
blade is bent or very worn,
replace it
See “Robot Cleaning”
See “Blade Replacement”
Battery charging knobs Clean and remove any rust See “Robot Cleaning”
Contact plates Clean and remove any rust See “Robot Cleaning”
Rain sensor Clean and remove any rust See “Robot Cleaning”
Monthly Robot Clean the robot See “Robot Cleaning”
Once a year and at the end
of the mowing season
Robot
Have the robot serviced at
an authorised service centre
See “Prolonged inactivity
and restarting”
ROBOT CLEANING
1. Stop the robot safely (see “Robot safety stop”).
Warning – Caution
Use protective gloves to avoid the risk of injury.
2. Clean the outside surfaces of the robot with a sponge using warm water and mild detergent. Wring the sponge out well to
remove any excess water before use.
Warning – Caution
Do not use a water hose to clean the robot. Water could get inside the robot and damage the components.
3. Do not use solvents or benzene so as not to damage the painted surfaces and plastic components.
4. Do not wash the internal parts of the robot and do not use jets of pressurised water so as not to damage the
electric and electronic components.
Warning – Caution
In order to not cause irreversible damage to the electric and electronic components, do not immerse the
robot, in water because it is not watertight.
5. Check the lower part of the robot (cutting blade area and wheels) and remove any deposits and/or residuals that may obstruct
the correct functioning of the robot.
6. To remove any deposits and/or other residuals from the blade, use a suitable brush.
7. Clean the knobs of the battery charger and removeany deposits or residuals caused by electric contacts with a dry cloth and,
if necessary, with ne sandpaper.
8. Check the level of sharpness of the cutting blade. If necessary sharpen.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ambrogio L60 Elite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ambrogio L60 Elite in the language / languages: English as an attachment in your email.

The manual is 6,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ambrogio L60 Elite

Ambrogio L60 Elite User Manual - German - 33 pages

Ambrogio L60 Elite User Manual - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info