644612
18
Zoom out
Zoom in
Previous page
1/32
Next page
18
User’s manual
EN
RECHARGING ROBOT
A. HIGH BATTERY:
(GREEN LED STEADY ON)
full battery level.
PLAY
OFF
ON
PAUSE
STOP
H
I
G
H
B
A
T
T
E
R
Y
L
O
W
B
A
T
T
E
R
Y
(A)
(B)
(C)
(D)
1
(GREEN LED 1 FLASH)
medium battery level.
B. LOW BATTERY:
(RED LED STEADY ON)
low battery level.
C. ON/OFF:
(GREEN LED STEADY ON)
robot in operation.
START-UP
1. Check that the grassy surface of the lawn to mow is at a height which is compatible with the proper functioning of the robot
(see technical specications).
2. Adjust the desired cutting height (see cutting height adjustment).
3. Check that the work area is correctly delimited and that there are no impediments to the correct functioning of the robot as
indicated in the section “Preparation and dening the boundaries of the work areas” and following sections.
4. Disconnect the robot from the recharging area.
5. Position the robot inside the grassy surface in an area where the grass is at least 1 metre (40.00 ") from any obstacle.
6. Press the “OFF/ON” key and wait a few seconds for the robot to turn on completely.
7. Press “PLAY/PAUSE” key to start the robot.
Once the robot has stopped due to the reasons described in the chapter “Robot Stop”, activate the safety stop and reposition the
robot inside the power supply unit for recharging.
Important
For a better cutting performance and correct functioning of the recognition sensor, do not start the robot in
case of rain or in very humid conditions. The best results are obtained in the middle of the day.
OPERATION WITH DELAYED START
If necessary, the robot can be delayed to start by up to 24 hours.
Press the “OFF/ON” button. After a few seconds the robot switches completely on. Press briey the “OFF/ON” button at intervals
of 1 second, as many times as the hours of delay of departure.
On completion of the sequence, wait for the robot to conrm the delay setting with the sound of a beep.
The robot will be in standby until the working cycle resumes the established time.
Important
In case of errors, turn off the robot by keeping the ON/OFF button pressed, and resume the start-up sequence.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ambrogio L50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ambrogio L50 in the language / languages: English as an attachment in your email.

The manual is 9,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ambrogio L50

Ambrogio L50 User Manual - German - 23 pages

Ambrogio L50 User Manual - German - 18 pages

Ambrogio L50 Additional guide - Dutch - 3 pages

Ambrogio L50 Additional guide - Dutch - 2 pages

Ambrogio L50 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info