644612
10
Zoom out
Zoom in
Previous page
1/32
Next page
10
User’s manual
EN
PREPARATION AND MARKING THE BOUNDARIES OF THE WORK AREAS
preparation of the lawn to be mowed
1. Make sure that the lawn to mow is even and does not contain holes, stones or other obstacles. Otherwise, prepare the lawn
by lling in any holes and removing any obstacles. If some obstacles cannot be removed, it is necessary to properly dene
and protect the interested areas.
2. Check that all the areas of the lawn do not exceed the allowable slopes (see “Technical Specications”).
The sensors, which recognise the presence of the grassy surface, allow the robot to move freely inside the lawn. The lawn must
be suitably checked and adjusted so that the robot has enough space for recognising when there is no grass. Carefully follow
the below points for the correct and safe use of the robot.
OK
WALL
higher than
9 cm. / 3,5 "
PAVING
wider than 25 cm. / 9,8 "
With the curb drop-off sensor installed,
Minimum width 10 cm / 4.0 "
HEDGING
SMALL ARCHES
Types of boundaries/protections that can be used for correctly dening the limits of the robot’s work area.
Pavement
The robot requires at least 25 cm (9.84 ") without any grass for
it to stop safely and change direction. For lawns with paths or
curbs, they must be at least 25 cm (9.84 ") wide. Any curbs that
are less than 25 cm (9.84 ") side, must be protected with paving
or arches in the ground, as shown in the gure, so that the robot
impacts with them.
The robot with the curb drop-off sensor installed needs 10 cm
(4,00 ") without any grass
.
minum width of 25 cm (9,80 ")
OK
With the curb drop-off sensor installed,
Minimum width 10 cm (4,00 ")
Wall
Perimeter wall, which denes the boundary of the work area at
a height above 9 cm. (3.54 "). If the walls are shorter, protect the
area with arches or adequate paving.
minimum high
9 cm. (3,50 ")
OK
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ambrogio L50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ambrogio L50 in the language / languages: English as an attachment in your email.

The manual is 9,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ambrogio L50

Ambrogio L50 User Manual - German - 23 pages

Ambrogio L50 User Manual - German - 18 pages

Ambrogio L50 Additional guide - Dutch - 3 pages

Ambrogio L50 Additional guide - Dutch - 2 pages

Ambrogio L50 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info