733762
31
Zoom out
Zoom in
Previous page
1/42
Next page
30
User’s manual
EN
VISUALISING THE DISPLAY DURING THE WORK PHASE
While in operation, the following data appears on the display of
the robot:
-
speed of mower;
-
cutting blade speed;
-
percentage of battery charge.
While the robot is charging, the display shows the charging level.
If the robot is outside the working time, the display shows the day
and time of the next scheduled start.
.....................................
......................
10:30
PROLONGED INACTIVITY AND RESTARTING
After a long period of inactivity of the robot and before the mowing season, it is necessary to perform a series of operations to
guarantee the correct functioning at the time of reuse.
1. Fully charge the battery before winter storage. Recharge the battery at least once every ve months.
2. Have the routine maintenance performed by an authorised dealer. This is essential for keeping the robot in good condition.
The assistance service usually includes the following operations:
total cleaning of the robot, the cutting blade and all the other moving parts;
cleaning of the inside of the robot;
checking of robot functioning;
checking and, if necessary, replacement of any worn parts such as the cutting blade, the brushes (only in robots equipped
with brushed motors);
checking of the battery capacity;
if necessary, the dealer may also load new software.
3. Accurately clean the robot and charging station (see “Robot Cleaning”).
4. Check any worn or damaged components such as the cutting blade and evaluate their replacement.
5. Store the robot in a protected and dry place with an ambient temperature between 10° and 20° C, out of reach of foreign
elements (children, animals, other foreign objects, etc.). Store the robot at a temperature below 20°C in order reduce the
automatic discharge of the batteries.
6. Disconnect the power plug (A) from the electrical outlet.
7. Cover the charging station (C) to prevent any foreign materials from getting inside (leaves, paper, etc.) and for preserving
the contact plates.
Restarting
Before restarting the robot after a long period of inactivity, proceed
as follows:
1. connect the plug of the power supply unit (A) to the electrical
outlet;
2. reconnect the main electrical power supply;
Restore the normal functioning of the robot as described in chapter
“INITIAL START UPAUTOMATIC MODE.”.
Current power
supplyunit (A)
Charging
station (C)
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ambrogio L350i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ambrogio L350i in the language / languages: English as an attachment in your email.

The manual is 7,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ambrogio L350i

Ambrogio L350i User Manual - Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info