733761
28
Zoom out
Zoom in
Previous page
1/38
Next page
26
User’s manual
EN
Work schedule
600
DIMENSION
mt
cm
mt
DISTANCE
ECO MODEDIRECTIONDISTANCE WIRE
375
OFF10
primary area
clockwise directionanti-clockwise direction
secondary area 1
(30%, 60MT, clokwise)
For each area of the garden you must set:
-
dimension. The indicative size of the work area in square metres;
-
distance. The distance required by the robot to reach the inside of the
area by following the perimeter wire. To ensure that the robot starts
working inside the desired area, it is recommended to use the middle of
the work area as a reference for the distance. Set the value to 0 for the
area where the charging station is positioned;
-
direction. Shortest direction to reach the work area. The direction can
be “clockwise” or “counter-clockwise”. On exiting the charging station, the
robot will follow the wire in the set direction;
-
wire distance. The distance of the robot from the perimeter wire for
reaching the work area. Set this value to “0cm” in complex gardens with
many obstacles near the perimeter wire and/or gardens with narrow
passages;
-
ECO mode. If enabled and the robot detects that the lawn surface has
been mowed, the working time in this area is reduced and the robot will
move to the next step.
General settings
General settings.
Protection. Allows enabling/disabling/changing the robot’s PIN CODE.
To set or change the password, rst enter the current PIN CODE and then the new PIN CODE. Upon purchase,
the password entered by the manufacturer consists of four numbers (“0000”).
Choose a number combination for the password that is easy to remember.
Connectivity. (Only in some models). Allows changing the connection parameters.
This allows setting a correction factor for the alignment and recognition of the charging station. Refer to the robot
menu or the APP for more details.
Resets the factory settings.
All congurations will be lost, the robot and garden settings will have to be congured again. The
PIN CODE will not be reset to the default value.
Sets the distance travelled by the robot after the perimeter wire, before changing direction. Set MIN to allow the
robot to travel the minimum possible distance, MAX for the maximum possible distance and MED for the medium
distance.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ambrogio L35 Deluxe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ambrogio L35 Deluxe in the language / languages: English as an attachment in your email.

The manual is 10,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ambrogio L35 Deluxe

Ambrogio L35 Deluxe User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info