733759
18
Zoom out
Zoom in
Previous page
1/42
Next page
16
User’s manual
EN
If there is a pool, pond, ravine, ditch, steps or public roads not protected by an easily crossable fence or wall inside or outside the
work area, install the perimeter wire at least 90 cm (35.43 inches) from the edge. In order to install the perimeter wire as close
as possible to the edge of the cutting area, we recommend installing a fence that is difcult to cross if adjacent to public areas,
or a fence at least 15 cm high in other cases. This will allow laying the perimeter wire at the distances described in the previous
paragraphs.
Important
Carefully follow the distances and slopes specied in the booklet to guarantee excellent installation and
proper functioning of the robot. Increase the distance by at least 30 cm (11.81 ") in the presence of slopes or
slippery ground.
90 cm.
/ 35,44 “
90 cm.
/ 35,44 “
90 cm.
/ 35,44 “
Obstacles resistant to knocks, such as trees, bushes or poles without sharp edges present inside the work area do not need to
be delimited. The robot hits the obstacle and changes direction. If you don’t want the robot to knock into the obstacles and for its
safe and silent operation, all the xed obstacles need to be delimited. Slightly sloping obstacles such as ower pots, stones or
trees with protruding roots must be delimited to protect the cutting blade and the obstacles themselves.
To mark the boundary of the obstacle, start from the outside point of the perimeter nearest the object to delimit, arrange the
perimeter wire so that it reaches the obstacle, goes around it and then travels back along the previous path, observing the regular
distances described in the previous paragraphs. Overlap the outgoing wire and the incoming wire so that they pass under the
same peg, this will allow the robot to go past the perimeter wire.
For the robot to function correctly, the minimum overlapping length should not be greater than 70 cm (27.56 ") in order to allow
the robot to move regularly.
NO
min. 70 cm
/ 27,56 ”
min. 70 cm
/ 27,56 ”
< 70 cm
/ 27,56 ”
< 70 cm
/ 27,56 ”
0 cm / 0 ”0 cm / 0 ”
plant
pole
OKOK
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ambrogio L250i Elite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ambrogio L250i Elite in the language / languages: English as an attachment in your email.

The manual is 8,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ambrogio L250i Elite

Ambrogio L250i Elite User Manual - German - 42 pages

Ambrogio L250i Elite User Manual - Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info