733760
15
Zoom out
Zoom in
Previous page
1/42
Next page
13
User’s manual
EN
PREPARATION AND MARKING THE BOUNDARIES OF THE WORK AREAS
Preparation of the lawn to be mowed
1. Make sure the lawn to be mowed is even and does not contain
holes, stones or other obstacles. If necessary, prepare the
lawn by lling in any holes and removing any obstacles. If
some obstacles cannot be removed, it is necessary to properly
mark these areas with the perimeter wire.
2. The robot can mow surfaces inside the working area with
a maximum slope of 45% (45 cm per meter in length) on a
regular dry lawn, with no risk of wheels slipping, based on
the accessories installed. In the other cases it is necessary to
respect the 35% of the slope.
The perimeter wire must be laid on the ground sloping no more
than 20% (20 cm per meter in length), being in mind that the
robot requires greater grip during the return to the charging
station. Therefore, it necessary to check carefully the lawn
conditions and to respect the limits. If the perimeter wire is
laid on the sloping more than 20%, the robot may depart from
it, to move more easily, not being able to overcome narrow
passages and to recognize the quick re-entry set up.
The slope must not increase at least 35cm inside or outside
the perimeter wire.
If these instructions should not be complied with, while the
robot is working on sloping areas and detects the wire, its
wheels could slip and make it leave the working area.
If there are any obstacles on slopes that are closed to the
abovementioned limits, the ground must be uniformed for at
least 35cm in the part uphill of the obstacle to reduce the slope.
Important
Areas with slopes greater than those allowed cannot
be mowed with the robot. Therefore, position the
perimeter wire in front of the slope so that it is
excluded from the area to mow.
NO
35 cm
(13,78 ")
100 cm (39,3 ")
45 cm
(17,71 ")
45 %
35 cm
(13,78 ")
21-45%
0-20%
21-45%
0-20%
0-45%
0-20%
perimeter wire
perimeter wire
OK
NO
NO
OK
OK
OK
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ambrogio L250i Elite S plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ambrogio L250i Elite S plus in the language / languages: English as an attachment in your email.

The manual is 8,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ambrogio L250i Elite S plus

Ambrogio L250i Elite S plus User Manual - German - 42 pages

Ambrogio L250i Elite S plus User Manual - Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info