733758
19
Zoom out
Zoom in
Previous page
1/42
Next page
17
User’s manual
EN
INSTALLATION OF PERIMETER WIRE
The perimeter wire can be buried or laid on the ground. If you
have a wire layer machine, it is better to bury the wire for greater
protection.
Otherwise, install the wire on the ground with the pegs provided
as described below.
Important
Start laying the perimeter wire from the area where
the charging station is installed, leaving a couple of
extra meters so that it can be cut down to size when
connecting to the power unit during the nal phase.
Max.
5 cm (1,96 ")
perimeter wire
Ground wire
Cut the grass as low as possible with a grass trimmer or brushcutter
along the entire path where the cable will be laid. This will make it
easier to lay the cable in contact with the ground and reduce the
risk of the robot damaging the insulation.
1. Position the wire in a clockwise direction along the entire path and
secure it with the pegs supplied, making sure there is a maximum
distance of around 100 cm (39.37 inches) between each peg. The
wire must be in contact with the ground to prevent it from being
damaged by the robot before the grass covers it.
-
When laying the perimeter wire, follow the installation
direction around the owerbeds, i.e. a counter-clockwise
direction.
-
In curved sections, secure the wire so that it is not twisted,
but curves nicely (radius of 20 cm).
PRIMARY AREA
corridor
< 70 cm (27,56 ")
35 cm
(13,78 ")
NO
0 cm (0,0 ")
wire fastening pegs
perimeter wire
radius of 20 cm
Buried wire
1. Dig an even furrow in the ground (approximately 2-3 cm or 0.787-1.181").
2. Position the wire in a clockwise direction along the track at a depth of a couple of centimetres. Do not bury the wire deeper
than 5 cm, so as not to reduce the quality and intensity of the signal picked up by the robot.
3. During the laying of the wire, it may be necessary to secure it in some points with the pegs provided in order to hold it in place
when covering with the ground.
4. Cover all the wire with soil and make sure it remains taut in the ground.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ambrogio L250 Deluxe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ambrogio L250 Deluxe in the language / languages: English as an attachment in your email.

The manual is 8,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ambrogio L250 Deluxe

Ambrogio L250 Deluxe User Manual - German - 42 pages

Ambrogio L250 Deluxe User Manual - Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info