342932

Amana xrss 665 bw bb Manual

18
Zoom out
Zoom in
Previous page
1/320
Next page
18
Dispenser Features
Hidden Control Features (Electronic Control)
Sabbath Mode
This mode is intended to deactivate power to the LED and dispenser lights, while allowing the
controls to remain operational. No visual or audio alarms will be available while in this mode.
NOTE: In the event that power is interrupted while the Sabbath Mode is active, the control will remain in
Sabbath Mode when power returns.
Hidden Lockout for Upper Keypad
The purpose of this mode is to prevent tampering with the upper set of dispenser controls.
This includes the Display On/Off , Max Freeze, Max Cool, Vacation Mode, and Temperature Set
functions.
+
ON/OFF Function
The ON/OFF function turns off cooling to the
fresh food and freezer sections.
Auto Display
The AUTO Display controls the illumination of the LED display based on the light readings received from the
SENSOR
.
In AUTO mode, if the
SENSOR
indicates low light levels, the display will be dimmer than if displaying during well-lit
periods. In ON mode, the display will have only one illumination setting and will not change due to light levels.
To set the power level of the display:
• Press and hold both the
button and the freezer button for 3 seconds. The current active state will show in
the display by using
O for on, AL for auto.
• Use the refrigerator button to scroll through the display states.
• Activate the chosen setting by pressing the
button.
To activate Sabbath Mode:
• Press and hold both the
and buttons
simultaneously for 3 seconds. After 3 seconds, the
LED and dispenser lights will turn off. Dispenser
light will not activate during dispensing while in
this mode.
To deactivate Sabbath Mode:
• Press and hold both
and buttons simultaneously for 3
seconds. After 3 seconds, the LED and dispenser lights will
activate.
To activate Hidden Dispenser Lockout:
• Press the
and buttons simultaneously for
3 seconds.
To deactivate Hidden Dispenser Lockout:
• Press the and buttons simultaneously
for 3 seconds.
To turn the unit off:
• Press the freezer button until the readout registers
beyond the maximum allowable freezer temperature. At
this point, the LED displays:
-- ---- --
-- ---- --
-- --
• Press the button to confirm the selection.
To reactivate the unit:
• Press the freezer button.
• Press the
button to confirm the selection.
WARNING!
To avoid electrical shock which can cause severe personal
injury or death, do not perform maintenance or service on
refrigerator unless unit is unplugged.
Temperature Conversion Mode
This mode is available to change the Temperature
Display between Fahrenheit and Celsius.
° F
° C
To change temperature reading:
• Press the
and freezer buttons simultaneously
for 3 seconds. Pressing the same button combination will allow
the user to toggle between the two selections .
+
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amana xrss 665 bw bb at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amana xrss 665 bw bb in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 18,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info