337386
24
Zoom out
Zoom in
Previous page
1/320
Next page
24
Before Calling Service
ICE & WATER
TOPIC POSSIBLE CAUSE SOLUTION
Ice maker is not producing
ice (some models-continued)
Improper water valve was installed. Check water connection procedure in your
Installation
Instructions
. Self-piercing and
3
/
16
saddle valves cause
low water pressure and may clog the line over time. The
manufacturer is not responsible for property damage
due to improper installation or water connection.
Plastic tubing was used to complete
water connection.
The manufacturer recommends using copper tubing
for installation. Plastic is less durable and can cause
leakage. The manufacturer is not responsible for
property damage due to improper installation or
water connection.
Unit is leaking water
Improper water valve was installed.
Check water connection procedure in your
Installation
Instructions
. Self-piercing and
3
/
16
” saddle valves cause
low water pressure and may clog the line over time. The
manufacturer is not responsible for property damage
due to improper installation or water connection.
Water pressure is low. Water pressure must be between 20 to 100 pounds per
square inch to function properly. A minimum pressure of
35 pounds per square inch is recommended for units with
water filters.
Ice forms in inlet tube to
ice maker
Freezer temperature is too high.
See the controls section in your Owner’s Manual for
assistance on how to adjust your controls. Freezer is
recommended to be between 0 to 2°F (-18 to –17°C).
Water pressure is low. Water pressure must be between 20 to 100 pounds per
square inch to function properly. A minimum pressure of
35 pounds per square inch is recommended for units with
water filters.
Improper water valve was installed. Check water connection procedure in your
Installation
Instructions
. Self-piercing and
3
/
16
” saddle valves cause
low water pressure and may clog the line over time. The
manufacturer is not responsible for property damage
due to improper installation or water connection.
Water inlet tubing has kinks.
Turn off water supply and remove kinks. If kinks cannot be
removed, replace tubing.
Water flow is slow er
than normal
Water filter is clogged or needs to
be changed.
Change water filter.
Refrigerator has been recently installed
Water supply in holding tank has
been depleted.
Allow approximately 12 hours for water in holding tank
to chill.
Dispenser water is not cold
Water has settle into water lines outside
holding tank and has warmed to
room temperature.
Discard first glass of water and refill.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amana xrss 267 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amana xrss 267 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 18,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info