342918
4
Zoom out
Zoom in
Previous page
1/108
Next page
4
Reversing Doors
1. Complete steps 1-2 in "Removing Handles"
section and steps 1-12 in "Removing Doors"
section.
2. Remove cover on handle nameplate by lifting
end. Bend tabs behind nameplate up and
remove nameplate. Rotate nameplate one half
turn. Replace nameplate and cover.
3. Remove plastic plugs from side of doors. Insert
in opposite side.
4. Place door handles on Fresh Food and
Deepfreeze
®
doors. Fresh Food handle
becomes Deepfreeze
®
handle and Deepfreeze
®
handle becomes Fresh Food handle. Insert
screws and tighten.
5. Replace door handle screw caps by snapping in.
6. Remove door stops from side of doors by
removing screws. Replace door stops on
opposite side.
7. Place bottom hinge and spacer(s) on opposite
side of refrigerator cabinet. Insert screws and
tighten.
Important
Spacer ring(s) can be moved to properly adjust doors.
8. Move bottom hinge pin to opposite hex hole.
Place spacer ring(s) on hinge pin.
9. Remove plastic plugs from side of refrigerator
cabinet. Insert in opposite side.
10. Turn over center hinge bracket and spacer(s).
Place bracket and spacer(s) on opposite side of
refrigerator cabinet. Insert screws and tighten.
11. Rehang Fresh Food door by positioning bottom
socket onto bottom hinge pin.
12. Tape Fresh Food door on top right and left
corners.
13. Place center hinge pin and spacer ring(s) on
center hinge bracket. Pin must fit through
bracket and into Fresh Food door socket.
14. Rehang Deepfreeze
®
door by positioning bottom
socket onto center hinge pin.
15. Tape Deepfreeze
®
door shut on top right and left
corners.
16. Remove plastic plugs from top of refrigerator
cabinet. Insert in opposite side.
17. Place top hinge and spacer(s) on opposite side
of refrigerator cabinet. Insert screws and tighten.
18. Replace top hinge cover by snapping on.
19. Replace bottom hinge cover by snapping on.
20. Replace toe grille by inserting clips in holes and
snapping in. Top of toe grille is indicated on
back of toe grille.
Leveling Refrigerator
1. Remove toe grille by pulling forward.
2. Remove bottom hinge cover by prying cover
away from hinge bracket.
3. Turn leveling screw clockwise to raise
refrigerator or counterclockwise to lower
refrigerator.
4. Open and close both doors completely.
Important
If refrigerator cannot be level due to flooring, use shims
under roller(s) to level refrigerator.
5. Turn leveling screws clockwise equally on both
side until front of refrigerator is 6.4 millimeters
higher than back.
6. Turn stabilizing leg until firmly in place against
floor.
7. Replace bottom hinge cover by snapping on.
8. Replace toe grille by inserting clips in holes and
snapping in. Top of toe grille is indicated on
back of toe grille.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amana tw 518 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amana tw 518 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info