Manual Amana AC 2224 (page 11 of 364) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

69160

Zoom out

Zoom in

1/364

Fresh Food Features

Shelves

Your refrigerator has either Spillsaver™ or non-sealed

shelve

s. Spillsaver™ shelves have a spill retainer edge

which allows for easier clean up and some are

equipped with the EasyGlide™ slide out feature. To

slide out (select models), grasp the front of the shelf

and pull forward. Push in the shelf to return to the

original position.

To Remov

e a Shelf:

• Slightly tilt up the

front and lift up the

rear of the shelf, then

pull the shelf straight

out.

To Lock the Shelf Into Another Position:

• Tilt up the front edge of the shelf.

•

Inser

t the hooks into the desired frame openings and

let the shelf settle into place.

•

Be sure the shelf is securely locked at the rear

he Crisper T

op serve

s as the lower fre

sh food shelf

To Remove the Crisper Top:

• Remove drawers as indicated (see page 12).

•

Place hand under the frame to push up the glass. Lift

glass out.

•

o inst

all, repeat above instructions in reverse order

To avoid personal injury or property damage,

observe the following:

• Never attempt to adjust a shelf that is loaded with

food.

• Confirm shelf is secure

before placing items on

shelf.

• Handle tempered glass shelves carefully. Shelves

may break suddenly if nicked, scratched, or

exposed to sudden temperature change.

CAUTION

Elevator™ Shelf (select models)

The Elevator™ Shelf is equipped with a spill-retaining

edge and the EasyGlide™ slide-out feature. It can be

adjusted up or down without unloading.

o Slide Out Elevator™ Shelf:

• Grasp the front of the shelf and pull forward.

• Push the shelf in to return to original position.

To Adjust the Elevator™ Shelf:

• Pull out the knob on the crank handle.

• Rotate the crank

clockwise to raise the shelf, and

counterclockwise to lower the height of the shelf.

To Remove Elevator™ Shelf:

• Completely unload the shelf and pull the shelf

forward.

• Pull until the shelf stops.

• Press

up on the tabs located underneath its outside

edges and continue pulling forward until the shelf is

clear of the frame.

To Replace Elevator™ Shelf:

• Align the shelf to the frame and push it all the way

back. It is not necessary to press up on the tabs for

reinst

allation.

In ordinary use, the Elevator™ Shelf frame assembly

does not require removal. Though unlikely, and not

recommended, the correct removal procedure is as

follows:

To Remove Frame Assembly:

• Unload the shelf completely.

• Slide the shelf forward about 5.1 cm and manually

move the two rear latche

s toward the shelf center.

• While supporting the entire shelf and frame from

underneath, lift slightly and rotate the assembly

approximately 30° to allow the rear mechanism to

clear the vertical rear side rails.

• The entire assembly can then be moved forward

and clear of the refrigerator compartment.

To Reinstall Frame Assembly:

• Reverse the removal procedure. Be sure the shelf

is in a level position. When the sliding shelf is

pushed to the rear, it will reposition the rear latches

to their correct operating position.

Latches

Slide Out

EasyGlide ShelfEasyGlide Shelf

(style may vary)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Amana AC 2224 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 71,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Amana AC 2224 Manual

Product: