478925
10
Zoom out
Zoom in
Previous page
1/26
Next page
10
Chapter 2: Operating Instructions
2.1 Charging the Battery:
The battery is not fully charged and it is highly recommended that you
charge your LIBRE before you begin using it.
Note: Using the LIBRE “out of the box” will not harm the device. You
will experience reduced battery life as the unit will not be fully charged.
Connect the power adapter to the LIBRE’s USB port and you will see
an animation of a battery charging on the LIBRE’s display. Please
charge the battery for a minimum of four (4) hours using the power
adapter. You may also charge the battery by connecting your LIBRE
to the USB port of your PC using the USB cable included with your
LIBRE. However, using this method will extend the charging time to
approximately seven (7) hours.
Please note, the animation simply informs the user that the LIBRE is
in charging mode. Please do not rely on the animation to verify the
battery level. To verify the battery level, please go to the Main Menu,
select Settings, System Settings and then Battery.
2.2 Powering On your LIBRE:
To properly power ON your LIBRE for the rst time, press and hold the
POWER button until you see the Aluratek logo on the LIBRE’s display then
release. The Main Menu should appear in approximately one minute.
To power the LIBRE ON or OFF for everyday use, simply press and
release the POWER button. Please DO NOT hold down or press the
POWER button repeatedly, the LIBRE will not respond properly.
To extend battery life, you can set the LIBRE to power OFF automatically
after 3 to 30 minutes. From the Main Menu, go toSettings”, thenUser
Settings” and select “Auto Power Off”. You may select from the follow-
ing choices: Never, 3 Minutes, 5 Minutes, 10 Minutes, 15 Minutes or 30
Minutes. Select your choice by using the up or down arrow keys and then
press “OK”.
If you have any issues powering your LIBRE ON or OFF, please RESET
your LIBRE (see Resetting your LIBRE section).
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aluratek AEBK01WF Lible-Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aluratek AEBK01WF Lible-Pro in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info