Manual Alto Professional Stealth Wireless (page 5 of 40) (English, German, Dutch, French, Italian, Spanish)

541743

Zoom out

Zoom in

1/40

Receiver Features

Bottom Panel

1. Output – Connect this XLR output to the input of your speaker.

2. Power – Connect the included 12V DC, 300 mA power supply here.

Front Panel

1. Antenna – The wireless receiver’s 2 antennas receive the signal that is

sent from the transmitter. Place the antennas in a vertical position for the

best signal quality.

2. AF Indicator – When illuminated, this LED indicates that an audio signal is

being detected by the receiver. If this LED does not turn on, check your

power connection and channel settings and try again.

3. RF Indicator – When illuminated, this LED indicates that the receiver is

receiving a signal. If this LED does not turn on, check your power

connection and channel settings and try again.

4. Power Indicator – When illuminated, this LED indicates the unit is

powered on.

5. Channel Select – To change the channel:

a. Press and hold the Channel Select button for approximately 1 second until the channel

number flashes.

b. While the channel number is flashing, tap the Channel Select button to cycle through the

16 available channels. Set the transmitter and receiver(s) to the same channel.

c. When the desired channel number is shown, wait for 3 seconds. When the channel

number stops flashing, that channel is now selected.

d. Use the Left/Right Selector switches to set which receiver receives the left and right

signals, since the left and right signals are sent on the same channel.

6. Power Button – Press this button to turn on the receiver.

Side Panel

1. Left/Right Selector – Selects which stereo channel the receiver receives from the

transmitter. This only applies if both receivers are being used in a stereo application.

On both receivers, set the switch to the appropriate positions that match the L/R

speaker configuration. The Trim controls are directly connected to the L/R receiver

settings.

2. Squelch – Sets a noise limit. Signals must come in above that noise limit in order to

pass through the squelch filter. There are three settings to choose from depending

on how much noise there is. Set this switch to the position that most effectively

eliminates noise while allowing the signal to come through.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alto Professional Stealth Wireless in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alto Professional Stealth Wireless

Alto Professional Stealth Wireless User Manual - English, German, Dutch, French, Italian, Spanish - 40 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alto Professional Stealth Wireless Manual

Product: