541743
7
Zoom out
Zoom in
Previous page
1/40
Next page
7
Speaker Mounting Diagram
See below for three ways to mount Stealth Wireless receivers to powered speakers:
1. M10 Screw: Use the supplied M10 screw to connect the Stealth Wireless receiver to the powered
speaker’s fly point.
2. Hook and Loop Strips: Use the Hook strip and Loop strip to mount the Stealth Wireless receiver
to any flat, stable surface.
3. Machine Screws: Caution: When using the supplied machine screws, check with a qualified
technician as improper installation can destroy internal speaker components.
Troubleshooting
No signal:
Make sure both the transmitter and receiver are set to the same channel.
Check the power LEDs on both the receiver and transmitter. If one of them is off, check that the
device’s power adapter is connected correctly.
Make sure the volume controls on your mixer and speakers are turned up.
Weak signal:
Make sure there are no objects (computers, walls, pipes, etc.) between the transmitter and
receivers.
Change the channel on both the transmitter and receiver (to the same channel).
Poor signal quality:
Make sure the receiver antennas do not touch each other.
For best signal reception, provide at least 10 feet (3 meters) of separation between the transmitter
and the receiver.
Keep any connected audio cables away from the antennas.
Make sure no other devices are sending signals on the same frequency channel that you are us-
ing.
Change the channel on both the transmitter and receiver (to the same channel).
Adjust the squelch control setting. A higher squelch setting provides better protection against
interference but may also reduce signal range. Choose a setting that most effectively mutes
interference yet allows the true signal to pass through. If poor signal quality requires a higher
squelch setting, try to eliminate the interference or switch the transmitter/receiver channel to avoid
a loss of signal range.
Mounting screw
Fly Point
Hook Strip
Loop
Strip
M10 screw
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alto Professional Stealth Wireless at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alto Professional Stealth Wireless in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alto Professional Stealth Wireless

Alto Professional Stealth Wireless User Manual - English, German, Dutch, French, Italian, Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info