541721

Alto Professional STAGEDRIVE plus Manual

18
Zoom out
Zoom in
Previous page
1/156
Next page
17
Note: Alongside the symbol of Total or Partial protection, the letter ‘M’ may also appear. This means that the
system is protected, but the PRESET in question has undergone one or more changes that have not yet
been stored. You can however switch the system on and off without any problems, as the current settings are
kept in the buffer memory. Nevertheless, if this is your primary setup, it's advisable to store it in a PRESET.
MEMORY CARD SUBMENU- Allows formatting (erasing) of the Multimedia Memory Card. A card cannot be
properly used by the system unless it is first formatted in the unit.
How to format the Card
1. Insert a Multimedia Memory Card in the slot.
2. In the Memory Card submenu, press ENTER
3. Press ENTER again to start formatting.
4. The system formats the card until it communicates that it has completed.
Note: in the event of an error or a Card fault, if there is no Card in the slot or if the Card is removed during
formatting, the display shows the following message:
During formatting, the system automatically stores the *Default* PRESET in all the 128 CARD memory
areas.
Note: since the system must always be configured, there are no empty memory areas. All the User and Card
areas not yet used by stored user data are automatically occupied by the *Default* PRESET, which contains
a standard start configuration with all the values of the various parameters at zero.
COMM. SETUP SUBMENU
This submenu allows access to the setting of communication with other units via the RS485 ports.
Note: Dump Out Preset the and Incoming Dump functions are an exception, as they're controlled directly in
the PRESET menu.
PRESET Change RX
Allows you to accept or ignore the PRESET Change command sent via a computer’s USB port or another
STAGEDRIVE+ when it loads a PRESET. The settings can be:
• Ignore PRESET Change commands received.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alto Professional STAGEDRIVE plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alto Professional STAGEDRIVE plus in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 14,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info