541729
7
Zoom out
Zoom in
Previous page
1/14
Next page
-. For Active Subwoofer & Satellite Speakers
6
Tripod
Mount
Tripod
Mount
Left
Main Mix
Output
Right
Main Mix
Output
QUICK START
SR Active Subwoofer & Satellite Speakers
Signal Cable
Signal Cable
Power Cord
2). Connect the power cord to mains.
3). Turn on your mixer first, then the active speaker cabinets.
4). Turn up the volume control fo the active speaker cabinets.
8). After using, turn off your active speaker cabinets first, then the mixer.
1). Connect one side of signal cable to output left/right of your audio mixer (with stereo-Jack or XLR) and the other
side to the left/right input (stereo/mono XLR) of the active subwoofer; with the second signal cable connect the
left/right output of the subwoofer (stereo/mono- XLR) to the line input (COMBO) of the active satellite (with stereo -
Jack or XLR).
7). Use PFL function to get the proper input level for the mixer, and adjust the main mix level control to manipulate the
output level.
5). Select one of the sixteen presets in to SR400A, with encoder knob (example: number 15 - DISCO + SW).
6). The Subwoofer SR500SA work with 16 presets, select the best crossover frequency presets between 1 (80Hz
BOOST 0°) in phase or 2 (80Hz BOOST 180°) out of phase, to 9 (160Hz BOOST 0°) in phase or 10 (160Hz BOOST
180°) out of phase, this preset included a +6dB bass boost; the other presets between 11 (100Hz FLAT 0°) in
phase or 12 (100Hz FLAT 180°) out of phase to 15 (140Hz FLAT 0°) in phase or 16 (140Hz FLAT 180°) out of
phase, work with a Natural Bass response, if required from the musical program.
Select one of the sixteen presets in to SR500SA, with encoder knob (example: number 4 - 100Hz BOOST 180°
out of phase, or the number 6 - 120Hz BOOST 180°) out of phase, for coupling to the preset 15 - DISCO + SW
of the satellite. The selection of phase conditions between 0° in phase or 180° out of phase is always necessary
after the setting of SR500SA in the environment
PRESET
10
11
12
13
14
15
16
CONCERT H. + SW
LIVE + SW
FLAT + SW
JAZZ + SW
ROCK + SW
DISCO + SW
KARAOKE + SW
SR400A SATELLITE PRESET
1-2-3-4
3-4-5-6
11-12-13-14
11-12-13-14
3-4-5-6
3-4-5-6
1-2-3-4
SR500SA SUBWOOFER
80Hz/100Hz BOOST 0°/180°
100Hz/120Hz BOOST 0°/180°
100Hz/120Hz FLAT 0°/180°
100Hz/120Hz FLAT 0°/180°
100Hz/120Hz BOOST 0°/180°
100Hz/120Hz BOOST 0°/180°
80Hz/100Hz BOOST 0°/180°
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alto Professional SR Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alto Professional SR Series in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info