541727
20
Zoom out
Zoom in
Previous page
1/28
Next page
19
Turn down all Input and Output Gain Controls.
Connect phantom powered microphones before switching on the +48Volt Phantom Power switch.
If you have a power amplifier connected to your L-16 set the Level of the amplifier at no more than 75%.
Now, set the CONTROL ROOM/PHONES level at no more than 50%. In this way you will be able to hear later
what you are doing connecting a pair of headphones or a pair of powered studio monitor speakers.
Position EQ controls on middle position.
Position panoramic (PAN) control on center position.
With a headphone or studio monitor speakers connected apply a Line Level input signal so that the PEAK LED
does not light up.
At this point increase the input gain so that the PEAK LED will blink occasionally. In this way you will maintain
good headroom and ideal dynamic range.
Now connect a microphone and ask the singer to sing loud into the microphone. Turn slowly the Gain Control
clockwise and have the PEAK LED blink only occasionally.
Now repeat the same sequence for all input channels. The Main LED Meter could move up into the red section.
In this case you can adjust the overall output level through the MAIN MIX control.
5. INSTALLATION AND CONNECTION
Ok, you have got to this point and you are now in the position to successfully operate your L-16. However, we advise
you to read carefully the following section to be the real Master of your own Mix. Not paying attention enough to the
input signal level, to the routing of the signal and the assignment of the signal will result in unwanted distortion, a
corrupted signal or no sound at all. So you should follow this procedure for every single channel:
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alto Professional L-16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alto Professional L-16 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info