541730

Alto Professional AMX-80 Manual

12
Zoom out
Zoom in
Previous page
1/16
Next page
10
5. QUICK START AND CONNECTIONS
OK. you have got to this point and you are now in the position to successfully operate
your AMX-80: However, we advise you to read carefully the following section to get
the best out of your AMX-80.
Not paying enough attention to the input signal level, to the routing of the signal and
the assignment of the signal will result in unwanted distortion, a corrupted signal or
no sound at all. So you should follow these procedures before operation:
1. Before connecting microphones or instruments, make sure that the power of all
your systems components including the AMX-80 is turned off. Also, make sure
that all input and output controls are turned down. This will avoid damage to your
speakers and excessive noise.
2. Properly connect all external equipment such as microphone, power amplifier,
speakers etc.
3. Now, turn on the power of any peripheral devices, then connect the 18VAC power
supply to your AMX-80 and to the AC socket.
NOTE: ThepoweramplifierorpoweredmonitorsshallbeturnedONafterthe
AMX-80 and OFF before the AMX-80 is turned OFF.
4. Set the output level of your AMX-80 or the connected power amplifier at no
more than 75%.
5. Set the PHONE level at no more than 50%.
7. Set panoramic ( PAN / BAL ) control on center position.
8. While speaking into the microphone ( or playing the instrument ) at normal volume,
adjust the channel level control so that the input PEAK LED light-up only
occasionally; in this way you will maintain good headroom and proper dynamic range.
9. You can shape the tone of each channel by adjusting the equalizer controls as
desired.
10.Now repeat the same sequence for all input channels. The Main LED Meter could
move up into the red section. In this case you can adjust the overall output level
through the MAIN MIX control..
6. Set HI, and LOW EQ controls on center position.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alto Professional AMX-80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alto Professional AMX-80 in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info