586744
5
Zoom out
Zoom in
Previous page
1/11
Next page
12
2.0 Operating Instructions
2.1 Operating facilities
Start/stop switch (1).
Spray handle with safety catch (5).
2.2 Connection
1. Attach the high pressure hose (4) to the high
pressure water outlet of the machine (2).
2. Attach the spray handle (5) to the high pressure
hose (4). Prior to operating the machine please
ensure that the high pressure hose has been
completely uncoiled. Whilst the machine is in
operation the hose MUST NOT loop.
3. Mount the nozzle or any other equipment you
want to use.
4. Connect the machine to the water and power
supplies.
The pressure washer is now ready for operation.
2.3 Start
1. Unlock the spray handle.
2. Activate the trigger and let the water run until all
air has escaped from hoses and pump.
3. Press the start/stop switch (1) into pos. "I".
2.4 Operation
1. The spray lance is affected by a thrust
during operation - therefore always hold
it fi rmly with both hands. NOTE: Point the
nozzle at the ground.
2. Activate the trigger of the spray handle.
3. Always adjust the distance and thus the pres-
sure of the nozzle to the surface which is to be
cleaned. (Note! pressure and spray angle can be
regulated on the nozzle).
NOTE: Do not cover the machine during operation.
If the machine is left or not used for 3 minutes, it
must be switched off on the start/stop switch (1)
(press the switch into pos "O").
Secure the spray handle against inadvertent use by
locking the trigger with the safety catch.
Operating Instructions EN
2.5 End of operation
1. Stop the machine by pressing the start/stop
switch (1) into pos. "O".
2. Disconnect the plug from the socket.
3. Shut off the water supply and ac ti vate the trigger
to relieve the machine of pres sure.
Concerning storage, please refer to section 5.0.
3.0 Accessories EN
Only use original accessories.
3.1 POWERSPEED
®
nozzle
The pressure washer is supplied with a
POWERSPEED
®
nozzle (8). This nozzle has a pen-
cil jet which rotates through 360° when in use. This
gives increased performance for removing diffi cult
and stubborn marks. To fi t the POWERSPEED
®
nozzle, proceed as follows:
1. Push the POWERSPEED
®
nozzle (8) into the
bayonet coupling of the spray handle (5) and twist
in a clockwise direction until it clicks into place.
3.2 Foam sprayer
To fi t the foam sprayer (9), proceed as follows:
1. Push the foam sprayer (9) into the bayonet
coupling of the spray handle (5) and twist in a
clockwise direction until it clicks into place. En-
sure that the clear plastic pipe is fi tted to the foam
sprayer.
2. Fill the bottle with a suit a ble biodegradable de-
ter gent.
3. Screw the bottle onto the foam sprayer.
Extra equipment
Multispeed
®
nozzle Universal adjustable nozzle:
Nozzle forward:
Low pres su re.
Nozzle backward:
High pressure.
Nozzle turned left:
20° spray angle.
Nozzle turned right:
No spray angle (pencil jet).
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alto COMPACT 1050 X-TRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alto COMPACT 1050 X-TRA in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alto COMPACT 1050 X-TRA

Alto COMPACT 1050 X-TRA User Manual - German - 11 pages

Alto COMPACT 1050 X-TRA User Manual - Dutch - 11 pages

Alto COMPACT 1050 X-TRA User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info