110622
18
Zoom out
Zoom in
Previous page
1/24
Next page
16
8 Exit the Alarm Set mode.
PresstheALARM1buttononthespeakersystemortheENTER
button on the wireless remote to exit the Alarm Set mode. The
speaker system will also automatically exit the Alarm Set mode after
5secondsofinactivity.
NOTE When exiting the Alarm Set mode, the alarm is automatically turned
on.Toturnoffthealarm,pressthecorrespondingALARM1/ALARM2button.
NOTE The alarm time is displayed in the lower right-hand corner of the LCD
display when you turn the alarm on. If both alarms are active, the time for
Alarm1willbedisplayedinthelowerright-handcorner.
NOTE Ifbothalarmsareactiveatoverlappingtimes,Alarm1takes
precedenceoverAlarm2.
NOTE This Altec Lansing Moondance Home speaker system features
a built-in backup battery system to provide continuous clock settings in
the event of a power failure. If a power failure occurs or the AC cord is
accidentally disconnected, the display will not remain lit and the alarm will
not function, but the current time will be maintained.
NOTE If “iPod” is selected as the alarm source but no iPod is docked when
thealarmgoesoff,thebuzzeralarmwillsoundinstead.
NOTE IftheiPod,FMradioorAUXINisplayingwhenthealarmgoesoff
and a different alarm source has been selected, the speaker system will
switch to the selected alarm source.
How to Set Alarm 2
Repeattheabovesteps,substituting“Alarm2”for“Alarm1.”
How to Use Alarm 1
1 Press the ALARM1 button on either the speaker system or the
wireless remote.
Thisactivatesthealarm.TheAlarm1iconintheupperleft-hand
corner of the LCD display will light and the alarm time will display in
the lower right-hand corner of the display.
2 When the clock times matches the alarm time, the alarm
sounds, the Alarm 1 icon flashes, and the whole display
flashes.
The alarm gets progressively louder until it reaches the set level. After
atotalof59minutes,thealarmwillsilenceitself.
3 To dismiss the alarm, press the ALARM1 or ALARM2 buttons
on the speaker system or the ALARM1 or ALARM2 buttons on
the wireless remote.
4 To disable the alarm before its time is up, press the Alarm1
button.
How to Use Alarm 2
Repeattheabovesteps,substituting“Alarm2”for“Alarm1.”
How to Use the Snooze Feature
PresstheSNOOZEbuttononcetosilencethealarmforaperiodof
5minutes.
Setting the Alarm
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Altec Lansing M-302 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Altec Lansing M-302 in the language / languages: English as an attachment in your email.

The manual is 3,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info