661086
19
Zoom out
Zoom in
Previous page
1/116
Next page
19-EN
Turning Power On or Off
Some of this unit’s functions cannot be performed while the vehicle is in
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake, before attempting these operations.
1
Turn the ignition key to the ACC or ON position.
The system turns on.
When turned on, the system displays the last mode screen that
was displayed before the ignition key was turned off. For
example, if the unit is in radio mode when ignition is turned off,
it will remain in radio mode when ignition is turned back on.
2
Press and hold the button for at least 3 seconds
to turn the power off.
The unit can be turned on by pressing any button.
The X800D is a precision device. Careful handling of the unit should
provide you with years of trouble-free operation.
Turning the System On
With the Alpine system, when the ignition key is turned to ACC or ON,
the opening screen will be automatically displayed.
1
When the system is used for the first time, the
language selection menu is displayed. There are 24
languages to choose from. Touch [] or [] to
scroll the list, and then touch the desired language.
You can also scroll through lists by touching the screen and
sliding your finger up and down.
2
Touch [OK].
The radio screen is displayed.
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
1
Turn off the unit power.
2
Press RESET switch with a ballpoint pen or similar
pointed object.
Inserting/Ejecting a Disc
1
Press c (Eject).
The Open/Tilt screen is displayed.
2
Touch [c Disc].
3
Insert the disc with the label side facing up.
Insert the disc until it is automatically pulled into the unit.
The unit starts to play the disc.
* The SD memory card does not support Music/Video playback.
For details on how to use SD memory cards, refer to “Navigation
System OM” on the supplied CD-ROM.
To remove the SD memory card, touch [ SD].
Insert the SD memory card into the slot until it is locked.
If the SD memory card is not inserted properly, the monitor cannot be
closed.
1
Press c (Eject).
The Open/Tilt screen is displayed.
2
Touch [c Disc].
The monitor will open. Then the disc is ejected.
When the disc has been ejected part way, take it out.
Even if no disc is inserted, the monitor will open after touching
[c Disc].
3
Touch [Close], or press any button.
If the disc does not eject after touching [c Disc], press and hold
c (Eject) for at least 5 seconds.
Do not apply shock to the monitor when it is open as it may result in
malfunction of the unit.
The monitor will stop at the set tilt angle when closing.
RESET switch
Inserting the Disc
Removing the Disc
CAUTION
Keep hands (or any other object) away from the monitor while it
is opening or closing to avoid damage or injury. The back of the
monitor tends to become very warm under normal operating
conditions. This is not a malfunction, but care should be taken to
avoid prolonged contact with it.
SD memory
card slot*
Disc Slot
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine X800D Navi Station at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine X800D Navi Station in the language / languages: English as an attachment in your email.

The manual is 11,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine X800D Navi Station

Alpine X800D Navi Station Additional guide - English - 84 pages

Alpine X800D Navi Station Quick start guide - English - 148 pages

Alpine X800D Navi Station Installation Guide - English - 84 pages

Alpine X800D Navi Station Quick start guide - German - 148 pages

Alpine X800D Navi Station Additional guide - German - 94 pages

Alpine X800D Navi Station Installation Guide - German - 84 pages

Alpine X800D Navi Station User Manual - German - 116 pages

Alpine X800D Navi Station Quick start guide - Dutch - 148 pages

Alpine X800D Navi Station User Manual - Dutch - 92 pages

Alpine X800D Navi Station Quick start guide - French - 148 pages

Alpine X800D Navi Station Installation Guide - French - 84 pages

Alpine X800D Navi Station Quick start guide - Italian - 148 pages

Alpine X800D Navi Station Installation Guide - Italian - 84 pages

Alpine X800D Navi Station Quick start guide - Polish, Swedish, Spanish - 148 pages

Alpine X800D Navi Station Installation Guide - Spanish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info