Manual Alpine UTE-92BT (page 32 of 50) (English)

660389

Zoom out

Zoom in

1/50

32-EN

By setting this item to ON, the unit will auto pair when an iPod/iPhone

is connected to this unit via the USB port.

 Setting item: USB PAIR

Setting contents:

OFF / ON (Initial setting)

OFF:

Turn off the auto pair function.

ON:

Auto pair when an iPod/iPhone is connected to this unit via the

USB port.

Note

• USB Auto-Pairing cannot take place if either device has been paired

previously. Make sure the device name of both has been deleted

from each device.

Select one of 5 connected Bluetooth compatible devices that you

previously registered.

 Setting item: PAIRED DEV

Turn the Rotary encoder to select a Bluetooth compatible

device you want to use (you want to change connection),

and then press ENTER.

Turn the Rotary encoder to select “CONNECT”, then press

ENTER to connect the selected device.

The connected device is marked with “l”. Select “DISCONNECT”

to disconnect this device. Select “CLEAR” when you want to clear

the device from the device list.

Notes

• If the connection is successfully changed, “CONNECTED” is displayed

for 2 seconds and the  indicator lights up, then the display returns to

the SETUP screen.

• If a Smartphone is connected to this unit successfully, the indicator

lights up to show the battery charge of the connected Smartphone. The

blinks as a low level warning. The indicator goes out when the

battery is drained. At this time, the Bluetooth function is unavailable

due to the Smartphone powered off.

• Indicator (Signal Strength):

The indicator will display the current signal strength of your service

provider. The indicator blinks when the signal of the connected

Smartphone is very weak. The indicator goes out when the

Smartphone is not in service area or receives no signal.

• Depending on the connected Smartphone, the (battery charge),

and (signal strength) indicators may not be displayed.

• A total of 5 devices can be registered. If a 6th device is registered, the

earliest registered device will be deleted automatically.

You can set whether this unit can be recognised or not from a Bluetooth

compatible device. Normally set this to ON.

 Setting item: VISIBLE M

Setting contents:

ON (Initial setting) / OFF

ON:

Enable recognition of this unit from the Bluetooth compatible

device.

OFF:

Disable recognition of this unit from the Bluetooth compatible

device.

Change these settings to improve the quality of the outgoing or

incoming call.

 Setting item: CALL SOUND

 Further setting items: SOURCE VOL / TYPE SET

Adjusting the volume (SOURCE VOL)

You can emphasise or weaken the volume level of the Phone call, the

ring tone and the microphone input to fit your own preferences.

Setting contents:

PHONE TALK:

−5 dB ~ +5 dB

RING TONE:

−5 dB ~ +5 dB

MIC GAIN:

−5 dB ~ +5 dB

Note

• The initial setting of PHONE TALK / RING TONE / MIC GAIN is 0.

Sound Auto setting (TYPE SET)

Depending on your calling environment, choose one of the settings

below which gives the best sound quality.

Setting contents:

TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4 / TYPE5

TYPE1:

Standard Mode (recommended)

TYPE2:

Enhances the noise reduction

TYPE3:

Enhances the echo-cancel

TYPE4:

Enhances both noise reduction and echo-cancel

TYPE5:

Weakens both noise reduction and echo-cancel

Note

• The functions below are designed to improve the sound quality of the

outgoing call.

Noise reduction: This function can reduce the road noise, but excessive

enhancement may affect the sound quality of the call.

Echo-cancel: This function can reduce the echo, but excessive

enhancement may affect the sound quality of the call.

You can choose whether to use this function according to the following

setting.

 Setting item: CALLER ID

Setting contents:

ON (Initial setting) / OFF

If you want to keep the ID information of the caller from others, set this

item to OFF. Depending on the stored ID information, while you are

dialling a number, or while a call is dialling in, “UNKNOWN” and

telephone number will be displayed.

Setting the Auto Pairing with iPod/iPhone

Setting the Bluetooth Device

Setting the Visible Mode

Setting the Bluetooth sound quality

Setting the caller information display

ON/OFF

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alpine UTE-92BT in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine UTE-92BT

Alpine UTE-92BT Quick start guide - English - 124 pages

Alpine UTE-92BT User Manual - German - 55 pages

Alpine UTE-92BT Quick start guide - German, Dutch - 124 pages

Alpine UTE-92BT User Manual - Dutch - 54 pages

Alpine UTE-92BT Quick start guide - French - 124 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alpine UTE-92BT Manual

Product: