536901
15
Zoom out
Zoom in
Previous page
1/34
Next page
15-EN
Adjusting Subwoofer Level/Bass Level/Mid
Level/Treble Level/Balance (Between Left
and Right)/Fader (Between Front and Rear)/
Loudness/Defeat
1
Press AUDIOSETUP repeatedly to choose the desired
mode.
Each press changes the mode as follows:
SUBWOOFER
*1/*3
BASS LEVEL
*2/*3
MID LEVEL
*2/*3
TRE LEVEL
*2/*3
BALANCE FADER LOUDNESS
*2/*3
DEFEAT VOLUME SUBWOOFER
*1 Only for CDE-182R/CDE-181 Series/CDE-180 Series. When the
SUBWOOFER mode is set to OFF, its level cannot be adjusted.
*2 Adjustable only when DEFEAT is OFF.
*3 Not displayed when BASS ENGINE SQ mode is on. (Page 16)
Note
If no operation is performed for 5 seconds, the unit automatically
returns to normal mode.
2
Turn the Rotary encoder until the desired sound is
obtained in each mode.
By setting DEFEAT ON, previously adjusted settings of BASS,
MID, TRE LEVEL and LOUDNESS will return to the factory
defaults.
Audio Setup
You can flexibly customize the unit to suit your own preference and
usage. From the AUDIO SETUP menu, Audio Setting can be modified.
1
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select AUDIO, and then press
ENTER.
Note
When BASS ENGINE SQ setting is set to OFF (MANUAL SET)
(page 16), you can also activate the Audio Setup mode directly by
pressing BASS.
3
Turn the Rotary encoder to select the desired sound
setting menu, and then press ENTER.
EQ PRESETS
*1/*3/*4
BASS ENGIN
*2
LOUDNESS
*1/*3
3BAND EQ
*1/*3/*4/*5
SOURCE VOL SUBWOOFER
*7
SUBW LPF
*1/*3/*6/*7
SUBW PHASE
*6/*7/*8
SUBW SYS
*3/*6/*7
POWER IC
*7
(e.g. Select SUBWOOFER)
*1 Adjustment cannot be performed when DEFEAT is set to ON.
*2 Not displayed when the Audio Setup mode is activated by
pressing BASS in MANUAL SET mode (page 18).
*3 These items are set uniformly in BASS ENGINE SQ mode by
adjusting BASS ENGINE SQ Level (page 18) and cannot be
adjusted separately. If you want to change these settings
separately, a message is displayed asking you to confirm that you
want to exit the BASS ENGINE SQ mode. SelectYES” to make
the setting.
*4 Any changes made to either EQ PRESETS or 3BAND EQ are
reflected in the other’s settings.
*5 In step 3, three sound adjustment items (Bass, Mid and Treble)
can be selected in 3BAND EQ mode. Turn the Rotary encoder
to select the desired item, and then press ENTER to continue
to step 4.
*6 These functions are inoperable when SUBWOOFER is set to
OFF.
*7 Only for CDE-182R/CDE-181 Series/CDE-180 Series.
*8 This function is inoperable when SUBW LPF is set to OFF
(page 17).
4
Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select SUBW ON or SUBW OFF)
5
Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
•Pressing r returns to the previous Sound menu mode.
Pressing and holding r for at least 2 seconds will return to normal
mode.
If no operation is performed for 60 seconds, Sound menu mode is
cancelled.
Sound Setting
Subwoofer +0 ~ +15
Bass level −7 ~ +7
Mid level −7 ~ +7
Treble level −7 ~ +7
Balance L15 ~ R15
Fader R15 ~ F15
Loudness ON/OFF
Defeat ON/OFF
Volume 0 ~ 35
Use steps 1 to 5 to select one of the setting modes to modify.
See the applicable section below for details about the
selected setting item.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine UTE-81R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine UTE-81R in the language / languages: English as an attachment in your email.

The manual is 2,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine UTE-81R

Alpine UTE-81R Quick start guide - English - 76 pages

Alpine UTE-81R User Manual - German - 35 pages

Alpine UTE-81R Quick start guide - German, Dutch - 76 pages

Alpine UTE-81R User Manual - Dutch - 35 pages

Alpine UTE-81R Quick start guide - French, Italian, Polish, Swedish, Spanish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info