536901

Alpine UTE-81R Manual

11
Zoom out
Zoom in
Previous page
1/34
Next page
11-EN
Receiving RDS Regional (Local) Stations
1
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP selection mode.
2
Turn the Rotary encoder to select the “TUNER” setup
mode, and then press ENTER.
3
Turn the Rotary encoder to select the “REGIONAL”, and
then press ENTER.
4
Turn the Rotary encoder to select “REG ON” or “REG OFF”.
In the OFF mode, the unit automatically keeps receiving the
related local RDS station.
5
Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
•Press r to return to the previous mode.
• Pressing and holding r for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
PI SEEK Setting
1
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the “TUNER” setup
mode, and then press ENTER.
3
Turn the Rotary encoder to select “PI SEEK”, and then
press ENTER.
4
Turn the Rotary encoder to select “PISEEK ON” or “PISEEK
OFF”.
5
Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
•Press r to return to the previous mode.
• Pressing and holding r for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Receiving Traffic Information
1
Press and hold BANDTA for at least 2 seconds so that the
“G” indicator lights up.
2
Press or to select your desired traffic information
station.
When a traffic information station is tuned in, the “T”
indicator lights up.
Traffic information is heard only when it is being broadcast. If
traffic information is not being broadcast, the unit is set in the
standby mode. When a traffic information broadcast begins, the
unit automatically receives it and the display shows “TRF-INFO”
for 2 seconds.
When the traffic information broadcast is over, the unit will
automatically set in the standby mode.
Notes
• If you do not want to listen to the traffic information being received,
lightly press BANDTA to skip that traffic information message. The TA
mode will remain in the ON position to receive the next traffic
information message.
• If the volume level is changed while receiving traffic information, the
changed volume level will be memorized. When traffic information is
received next time, the volume level will be automatically adjusted to
the level memorized.
• In the TA mode, the SEEK tuning selects only the TP stations.
Receiving Traffic Information While Playing
USB Audio or Radio
1
Press and hold BANDTA for at least 2 seconds so that the
“G” indicator lights up.
2
Press or to select a traffic information station if
necessary.
When a traffic information broadcast starts, the unit
automatically mutes the audio source (such as regular FM
broadcast, USB AUDIO, etc.).
When the traffic information broadcast finishes, the unit
automatically returns to the original source play before the
traffic information broadcast began.
When traffic information stations cannot be received:
In the tuner mode:
When the TP signal can no longer be received for over 1 minute,
the “G” indicator blinks.
In other audio source mode:
When the TP signal can no longer be received, the traffic
information station of another frequency will be selected
automatically.
Note
• The receiver is equipped with the EON (Enhanced Other Networks)
function in order to keep track of additional alternate frequencies to
the AF list. If the station being received does not broadcast the traffic
information, the receiver automatically tunes in the related station that
broadcasts the traffic information when it occurs.
3
Press and hold BANDTA for at least 2 seconds to
deactivate the Traffic Information mode.
The “G” indicator goes out.
Displaying Radio Text
Text messages from a radio station can be displayed.
Press VIEW while receiving FM in the radio mode to select
the Radio Text display.
The display will change every time the button is pressed.
For details, refer to “Displaying the Text” on page 19.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine UTE-81R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine UTE-81R in the language / languages: English as an attachment in your email.

The manual is 2,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alpine UTE-81R

Alpine UTE-81R Quick start guide - English - 76 pages

Alpine UTE-81R User Manual - German - 35 pages

Alpine UTE-81R Quick start guide - German, Dutch - 76 pages

Alpine UTE-81R User Manual - Dutch - 35 pages

Alpine UTE-81R Quick start guide - French, Italian, Polish, Swedish, Spanish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info