Manual Alpine TDA7587R (page 13 of 44) (English, German, French, Italian, Swedish, Spanish)

466964

Zoom out

Zoom in

1/44

11-EN

Basic

3 Press the TUNE button to turn on or off the

DEMO mode.

Each press toggles between "DEMO ON" and

"DEMO OFF."

If no buttons are pressed 30 seconds after the

DEMO mode is turned ON. The DEMO mode

then begins.

NOTE

The initial setting at the factory is "DEMO ON."

4 Press the SETUP button again to return to

normal operation.

Setting the Bass Control

You can change the Bass Frequency emphasis to

create your own tonal preference.

1 Press the CENTER f button to select the BASS

(bass Centre frequency) control mode.

2-1

Setting the bass Centre frequency:

Press the g DN or f UP button to select

the desired bass centre frequency.

Emphasizes the displayed Bass frequency

ranges.

2-2

Setting the bass Band Width (Q-Factor):

Press the BAND button to select the desired

bass Band Width.

Changes the bass boost band width to narrow or

wide. A wide setting will boost a wide range of

frequencies above and below the centre

frequency. A narrower setting will boost only

frequencies near the centre frequency.

2-3

Setting the bass Level:

Rotate the MODE (Audio Control) knob to select

the desired bass Level (-7~+7).

You can emphasize or weaken the bass

frequency.

NOTES

• If no buttons are pressed within 5 seconds, the Bass

control setting will be turned off automatically.

• The settings of the Bass will be individually

memorized for each source (FM, MW (LW), Tape and

CD) until the setting is changed. Depending on the

connected devices, some functions and display

indications do not work.

Setting the Treble Control

You can change the Treble Frequency emphasis

to create your own tonal preference.

1 Press the CENTER f button select on the

TREBLE (treble Centre frequency) control mode.

2-1

Setting the treble Centre frequency:

Press g DN or f UP button to select the

desired treble centre frequency.

Emphasizes the displayed Treble frequency

ranges.

2-2

Setting the treble Level:

Rotate the MODE (Audio Control) knob to select

the desired Treble Level (-7~+7).

You can emphasize the treble frequency.

NOTES

• If no buttons are pressed within 5 seconds, the Treble

control setting will be turned off automatically.

• The settings of the Treble will be individually

memorized for each source (FM, MW (LW), Tape and

CD) until the setting is changed. Depending on the

connected devices, some functions and display

indications do not work.

→ B.Width1 → B.Width2→ B.Width3 → B.Width4

(Wide)←→(Narrow)

...........................

→ 10kHz → 12.5kHz → 15kHz → 17.5kHz

→ 60Hz → 70Hz → 80Hz → 90Hz

180Hz ← 150Hz ← 130Hz ← 100Hz ←

→ BASS → TREBLE → OFF

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alpine TDA7587R in the language / languages: English, German, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 0,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alpine TDA7587R Manual

Product: