168573
15
Zoom out
Zoom in
Previous page
1/44
Next page
13-EN
Basic
Pattern1 Pattern2 Pattern3 Display OFF
Adjusting the built-in Crossover
You can change High Pass Filter, Low Pass Filter,
Phase on this unit, so that you can create your
favourite sound effects.
1 Press the X-OVER button repeatedly to select
the desired parameter.
2 Press the DN g or f UP button to select
the disired setting.
1. HPF (Setting the High Pass Filter):
OFF 80Hz 120Hz 160Hz
Outputs all frequencies higher than that selected
according to your preference.
2. LPF (Setting the Low Pass Filter):
OFF 80Hz 120Hz 160Hz
Outputs all frequencies lower than that selected
according to your preference.
(Only available when using the subwoofer output
from this unit.)
NOTES
If you turn the battery power OFF, all settings return
to factory default.
If HPF, LPF, Bass Control and Treble Control are all
set to ON, depending on the Bass Control and Treble
Control settings, you may not be able to reinforce the
sound effect.
Except when the HPF and LPF is turned OFF, the
subwoofer is in monaural mode.
When the subwoofer is set to OFF, LPF mode and
change of phase does not work.
If no buttons are pressed within 5 seconds, the display
for setup menu disappears while an ordinary menu
appears on the display.
OFF HPF LPF
Switching the Display Modes
CDA-7876RB/TDA-7588RB only
You can select the display pattern mode from
three display patterns. You can also deactivate the
display.
1 Press the DISP (DISPLAY) button to select the
desired Display pattern mode.
Each press changes the display patterns.
Changing the Audio Level Display
Pattern
CDA-7873R/TDA-7587R only
You can select the disired display pattern mode
from three Audio Level Display Patterns. You can
also deactivate the display.
1 Press DISP button to switch the display pattern.
Pattern 1 Pattern 2 Pattern 3 Display OFF
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine tda 7587 r at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine tda 7587 r in the language / languages: English, German, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info