62088

Alpine SWE-1000 Manual

12
Zoom out
Zoom in
Previous page
1/17
Next page
11-EN
ALPINE SWE-1000 68-04123Z97-A (EN)
1. Set the GAIN to MIN, PHASE to NORM, LP FILTER to CENTER before switching on the system.
2. Set the Bass/Treble adjustment to zero on the head unit. Set the volume to your average listening level. It
may help to use a music source that is familiar.
3. Next, gradually increase the gain level. Increase the level to the point where the sound of your system, as
a whole, is balanced. If the gain level is set too high, the subwoofer may begin to distort. Distortion may
also occur if the volume is set too high on the head unit. Check that the other speakers have not begun to
distort, before proceeding with the adjustment. If the entire speaker system in the car is distorting, reduce
the volume of the head unit.
4. Once the gain has been set, adjust the LP FILTER at a frequency which compliments your speaker
system.
5. Adjusting the LP FILTER will change the output volume of the subwoofer. Repeat procedures 3 and 4 until
the ideal setting is found.
6. The final adjustment is the PHASE of the subwoofer. While sitting in the driver’s seat and with music
playing, switch between NORM and REV. Select the setting which sounds better –The ideal PHASE
setting varies from car to car, depending on the location of the subwoofer and the acoustic characteristics
of the vehicle interior.
4. ADJUSTMENT
1 Power indicator: Lights when power is on.
2 Input sensitivity adjustment (GAIN):
Adjusts volume (increase/decrease).
Decrease the volume by setting towards MIN.
3 Low pass filter frequency adjustment (LP FILTER):
Adjusts the centre frequency of the low pass filter.
Balance between speakers can be adjusted.
4 Phase switch:
Adjusts the speaker phase.
Phase alignment between speakers can be adjusted. Phase can be
switched between norm phase (0° - NORM) and reverse phase (180° -
REV.).
CAUTION
DO NOT EXCEED THE INPUT LEVEL SPECIFIED FOR
THIS PRODUCT.
If sound distortion or popping noise is output from the
speaker, the input level to the speaker is excessively
increased. If the input level to the speaker remains excessive,
its performance may result in deterioration or cause damage
to the speaker.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine SWE-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine SWE-1000 in the language / languages: English, German, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info