466968

Alpine SWD-2030 Manual

8
Zoom out
Zoom in
Previous page
1/10
Next page
• CONNECTIONS FOR SPEAKER LEVEL INPUT
Memo
• This product cannot be used with cars fitted with a common negative speaker system.
• Speaker impedance must be 3.2 ~ 8 ohms.
• To prevent external noise from entering the audio system:
• Locate the unit and route the leads at least 10 cm away from the car harness.
• Keep the battery power leads as far away from other leads as possible.
• Connect the ground lead securely and safely to a bare metal spot (remove the coating if
necessary) of the car chassis.
• If you add an optional noise suppressor, connect it as far away from the unit as possible. Your
Alpine Dealer carries various Alpine noise suppressors, contact them for further information.
• Your Alpine Dealer knows best about noise prevention measures so consult your dealer for
further information.
EN
8
Type of Lead Additional Information
Remote turn on lead
Ground lead
Battery power lead
Attach securely and safely to a bare metal spot of the car’s chassis.
Connect directly to the positive terminal of the car’s battery.
Connect the remote cable coming from the radio.
In case your radio does not provide a remote signal, the SWD-2030 will generate it
from the radio outputs and switch on and off together with the radio. A remote cable
may also be connected when using High-Power radio outputs, but in general this is
not necessary.
Head Unit
Blue/White
Remote turn on
extension lead*
Remote turn on
Black
Ground
Connection*
Battery
extension lead *
FUSE
Yellow
Speaker to RCA
input lead**
Left speaker
Green
Left speaker
Green/Black
White
Red
Right speaker
Violet
Right speaker
Violet/Black
Connections using Scotchlock
Press until they
are securely
locked
Lead must be
2-2.7mm in diameter
If not seek advice from
your Alpine Dealer
* Sold separately
** - transparent insulation / no stripe
+ transparent insulation / red stripe
+
_
+
_
Speaker to RCA
input lead**
… 8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine SWD-2030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine SWD-2030 in the language / languages: English, German, French, Italian, Swedish as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info