471407

Alpine RUX-C800 Manual

60
Zoom out
Zoom in
Previous page
1/67
Next page
58-EN
01GB07PXAH800.fm
ALPINE PXA-H800_EN 68-13530Z65-A (B5)
From the Commander
Setting the Color for the Commander
Illumination Button (ILLUMINATION)
You can change the lighting color of the buttons. (Initial setting:
“BLUE”)
1
Press [FUNC.].
2
Rotate the [Rotary encoder] to select “Display
Setup,” and then press the [Rotary encoder].
3
Rotate the [Rotary encoder] to select
“ILLUMINATION,” and then press the [Rotary
encoder].
4
Rotate the [Rotary encoder] to select “BLUE” or
“RED.”
5
When the setting is complete, press and hold [ ]
for at least 2 seconds.
• If [ ] is pressed during setting, the unit returns to the previous
item.
Adjusting the Brightness of the Display
(Dimmer)
Set the Dimmer control to “Auto” to decrease the illumination
brightness of the unit with the head lights of the vehicle ON. This mode
is useful if you feel the unit’s backlighting is too bright at night. (Initial
setting: “Auto”)
1
Press [FUNC.].
2
Rotate the [Rotary encoder] to select “Display
Setup,” and then press the [Rotary encoder].
3
Rotate the [Rotary encoder] to select “Dimmer,” and
then press the [Rotary encoder].
4
Rotate the [Rotary encoder] to select “Auto” or
“Manual.”
5
When the setting is complete, press and hold [ ]
for at least 2 seconds.
• If [ ] is pressed during setting, the unit returns to the previous
item.
• When “Manual” is selected, the brightness of the display does not
change if you turn on the headlamps. This always sets the brightness
at the level specified in “Adjusting the Brightness Level of the
Display (Dimmer Level)” (page 58).
Adjusting the Brightness Level of the
Display (Dimmer Level)
With the Dimmer control ON, three Dimmer levels are available. The
highest, Level 3, being the most dim with the vehicle's headlights ON.
(Initial setting: “Level 1”)
1
Press [FUNC.].
2
Rotate the [Rotary encoder] to select “Display
Setup,” and then press the [Rotary encoder].
3
Rotate the [Rotary encoder] to select “Dimmer
Level,” and then press the [Rotary encoder].
4
Select one from “Level 1” through “Level 3” by
rotating the [Rotary encoder].
5
When the setting is complete, press and hold [ ]
for at least 2 seconds.
• If [ ] is pressed during setting, the unit returns to the previous
item.
01GB00PXAH800.book Page 58 Tuesday, February 8, 2011 9:04 PM
… 60 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine RUX-C800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine RUX-C800 in the language / languages: English as an attachment in your email.

The manual is 11,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info