471407

Alpine RUX-C800 Manual

55
Zoom out
Zoom in
Previous page
1/67
Next page
53-EN
01GB07PXAH800.fm
ALPINE PXA-H800_EN 68-13530Z65-A (B5)
From the Commander
8
When the setting is complete, press and hold [ ]
for at least 2 seconds.
• If [ ] is pressed during setting, the unit returns to the previous
item.
• When both Rear and Center speakers are off in “Setting the Speaker
System (System Select)” (page 37)/“Setting the Speakers (Speaker
Setup)” (page 38), this item cannot be set.
• This function only works with 2-channel signals.
• After the setting, it is recommended to store the setting contents on
the unit. For details, refer to “Storing the Preset Values (Preset
Store)” (page 36).
Using Dolby Pro Logic II (Dolby PLII)
Pro Logic processing can be applied to the music signals recorded in 2-
channel stereo. This gives normal 2-channel stereo a more live, concert
hall effect. When you select “Music,” you can adjust the center width.
This function provides the optimum vocal localization by adjusting the
center channel localization in between the center speaker and the L/R
speakers. (Initial setting: “Music”)
1
Press [FUNC.].
2
Rotate the [Rotary encoder] to select “Playback
Mode,” and then press the [Rotary encoder].
3
Rotate the [Rotary encoder] to select “Mode,” and
then press the [Rotary encoder].
The Mode selection screen is displayed.
4
Rotate the [Rotary encoder] to select “Dolby PLII,”
and then press the [Rotary encoder].
5
Press [ ].
This will take you back to the Step 3 screen.
6
Rotate the [Rotary encoder] to select “Dolby PLII,”
and then press the [Rotary encoder].
The DOLBY PLII screen is displayed.
7
Rotate the [Rotary encoder] to select “Music” or
“Movie,” and then press the [Rotary encoder].
Music: Suits the stereo TV shows and all programs
encoded in Dolby Surround. It improves the sound
field directivity to near that of discrete 5.1-channel
sound.
Movie: Can be used for all stereo music recordings, and
provides a wide, deep sound field.
8
When the setting is complete, press and hold [ ]
for at least 2 seconds.
• If [ ] is pressed during setting, the unit returns to the previous
item.
• For the details of Dolby Pro Logic II, see page 61.
• When both Rear and Center speakers are off in “Setting the Speaker
System (System Select)” (page 37)/“Setting the Speakers (Speaker
Setup)” (page 38), this item cannot be set.
• This function only works with 2-channel signals.
• After the setting, it is recommended to store the setting contents on
the unit. For details, refer to “Storing the Preset Values (Preset
Store)” (page 36).
Adjusting the Center Width (Center Width)
When you select “Music” for “Dolby Pro Logic II,” you can further
adjust the center width in the following steps. This function offers the
optimum vocal position by adjusting the center channel position
between the center speaker and the L/R speaker. (The adjustments
established in “Adjusting the Acoustic Image (BI-PHANTOM)”
(page 55) are ineffective while this function is activated.) (Initial setting:
“OFF”, “Level 0”)
1
Press [FUNC.].
2
Rotate the [Rotary encoder] to select “Playback
Mode,” and then press the [Rotary encoder].
3
Rotate the [Rotary encoder] to select “Center Width,”
and then press the [Rotary encoder].
4
Rotate the [Rotary encoder] to select “ON,” and then
press the [Rotary encoder].
5
Adjust the level by rotating the [Rotary encoder].
LEVEL: 0 to 7
When the level becomes higher, the center channel
localization shifts from the center speaker toward both
sides.
6
When the setting is complete, press and hold [ ]
for at least 2 seconds.
• When the Center speaker is off in “Setting the Speaker System
(System Select)” (page 37)/“Setting the Speakers (Speaker Setup)”
(page 38), this item cannot be set.
• After the setting, it is recommended to store the setting contents on
the unit. For details, refer to “Storing the Preset Values (Preset
Store)” (page 36).
01GB00PXAH800.book Page 53 Tuesday, February 8, 2011 9:04 PM
… 55 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine RUX-C800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine RUX-C800 in the language / languages: English as an attachment in your email.

The manual is 11,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info