471407

Alpine RUX-C800 Manual

42
Zoom out
Zoom in
Previous page
1/67
Next page
40-EN
01GB07PXAH800.fm
ALPINE PXA-H800_EN 68-13530Z65-A (B5)
From the Commander
Setting the Digital Input (Digital AUX)
A TV or VCR with RCA audio output can be connected to the unit.
Select OFF for any external input that is not connected (Initial setting:
“ON”).
1
Press [FUNC.].
2
Rotate the [Rotary encoder] to select “Input Setup,”
and then press the [Rotary encoder].
3
Rotate the [Rotary encoder] to select “Digital AUX,”
and then press the [Rotary encoder].
The AUX selection screen is displayed.
4
Rotate the [Rotary encoder] to select “Digital 1,” and
then press the [Rotary encoder].
5
Rotate the [Rotary encoder] to select “ON” or “OFF,”
and then press the [Rotary encoder].
6
Press [ ].
7
Rotate the [Rotary encoder] to select “Digital 2,” and
then press the [Rotary encoder].
8
Rotate the [Rotary encoder] to select “ON” or “OFF,”
and then press the [Rotary encoder].
9
When the setting is complete, press and hold [ ]
for at least 2 seconds.
• When an Ai-NET compatible head unit is connected, external input of
the PXA-H800 becomes unavailable, and this setting will be
disabled.
• If [ ] is pressed during setting, the unit returns to the previous
item.
• After the setting, it is recommended to store the setting contents on
the unit. For details, refer to “Storing the Preset Values (Preset
Store)” (page 36).
Setting the AUX Volume Input Level
(AUX IN Gain)
If the external input audio becomes distorted, select High. (Initial
setting: “High”)
1
Press [FUNC.].
2
Rotate the [Rotary encoder] to select “Input Setup,”
and then press the [Rotary encoder].
3
Rotate the [Rotary encoder] to select “AUX IN Gain,”
and then press the [Rotary encoder].
The AUX selection screen is displayed.
4
Select the AUX you want to set by rotating the
[Rotary encoder], and press the [Rotary encoder].
Settings item: AUX 1, AUX2, AUX 3
• The number of AUX varies depending on the AUX Input Setup
(page 39).
5
Rotate the [Rotary encoder] to select “High” or
“Low”, and then press the [Rotary encoder].
High: When the volume level of the external input is high.
Low: When the volume level of the external input is low.
6
To set another AUX, press [ ] and repeat Steps 4
and 5.
7
When the setting is complete, press and hold [ ]
for at least 2 seconds.
• If [ ] is pressed during setting, the unit returns to the previous
item.
• After the setting, it is recommended to store the setting contents on
the unit. For details, refer to “Storing the Preset Values (Preset
Store)” (page 36).
Adjusting the AUX Volume Level (AUX
Level)
You can adjust the volume signal level of the external RCA input.
Adjust this when the volume is higher or lower compared to that of the
optical digital product. (Initial setting: “0 dB”)
1
Press [FUNC.].
2
Rotate the [Rotary encoder] to select “Input Setup,”
and then press the [Rotary encoder].
3
Rotate the [Rotary encoder] to select “AUX Level,”
and then press the [Rotary encoder].
The AUX Selection screen is displayed.
4
Select the AUX you want to set by rotating the
[Rotary encoder], and press the [Rotary encoder].
Settings item: AUX 1/AUX 2/AUX 3/Ai-NET(HU)/Ai-
NET(CHG)
• The number of AUX varies depending on the AUX Input Setup
(page 39).
5
Adjust the volume level by rotating the [Rotary
encoder].
Setting contents: -10 to +10 dB
6
To set another AUX, press [ ] and repeat Steps 4
and 5.
01GB00PXAH800.book Page 40 Tuesday, February 8, 2011 9:04 PM
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine RUX-C800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine RUX-C800 in the language / languages: English as an attachment in your email.

The manual is 11,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info