Manual Alpine RUX-C800 (page 39 of 67) (English)

471407

Zoom out

Zoom in

1/67

37-EN

01GB07PXAH800.fm

ALPINE PXA-H800_EN 68-13530Z65-A (B5)

From the Commander

Select one from “P.1” through “P.6” by rotating the

[Rotary encoder], and press the [Rotary encoder].

The data is stored in the selected preset number.

• The function is operable when Defeat is set to OFF.

• The stored contents are not deleted even when resetting the unit or

disconnecting the battery.

Recalling a Stored Setting (Preset Call)

The preset memory stores various setting/adjustment information. Thus,

it takes some time to call data from the preset memory.

Press and hold [VIEW] for at least 2 seconds.

Select a preset from “P.1” through “P.6” by rotating

the [Rotary encoder], and press the [Rotary

encoder].

The values of the selected preset number are retrieved.

• You can call the Preset even by the following procedure:

1 Press [FUNC.].

2 Rotate the [Rotary encoder] to select “Preset, ” and then

press the [Rotary encoder].

3 Rotate the [Rotary encoder] to select “Call,” and then

press the [Rotary encoder].

4 Select a preset from “P.1” through “P.6” by rotating the

[Rotary encoder], and press the [Rotary encoder].

The values of the selected preset number are retrieved.

• The function is operable when Defeat is set to OFF.

• If the speaker system in the preset and the current speaker system do

not match, the preset cannot be retrieved.

• If the AUX input system in the preset and the current AUX input

system do not match, the items concerning the AUX input system are

unavailable for retrieval.

Setting the Speaker System (System

Select)

First, set the system and the speakers. Unless you set the system, you

cannot set any features. Be sure to set the system first. If the selected

system and the connections of the speakers do not match, the speakers

may be damaged. Make sure to check the connections of the speakers

before selecting the system.

Press [FUNC.].

Rotate the [Rotary encoder] to select “Output

Setup,” and then press the [Rotary encoder].

Rotate the [Rotary encoder] to select “System

Select,” and then press the [Rotary encoder].

The Output System selection screen is displayed.

Rotate the [Rotary encoder] to select a system, and

then press the [Rotary encoder].

F-2way+R+SW: 4.2ch system

(Front2Way+Rear+Subwoofer)

F-3way+SW: 2.2ch system (Front3Way+Subwoofer)

F-3way+R: 4.0ch system (Front3Way+Rear)

F-2way+R+C+SW: 5.1ch system

(Front2Way+Rear+Center+Subwoofer)

• Refer to Table 1 (Output System) in “System Configuration”

(page 60).

Select “OK” by rotating the [Rotary encoder] when a

confirmation message appears, and press the

[Rotary encoder].

The Speaker Setup screen is displayed.

• When “OK” is selected, the audio output is stopped until the ignition

key is turned on/off.

Turn off any unconnected speakers. Rotate the

[Rotary encoder] to select “ON” or “OFF,” etc., and

then press the [Rotary encoder].

Repeat the steps until all the speakers are set.

FRONT HIGH*

: OFF/Tweeter/Full

FRONT LOW: OFF/ON

REAR: OFF/ON

CENTER: OFF/ON

SUBWOOFER(1, 2): OFF/ON

SW CHANNEL: Mono/Stereo*

Only for the initial startup:

Press the [FUNC.] or [Rotary encoder].

The Output System selection screen is displayed. Go to

Step 3.

01GB00PXAH800.book Page 37 Tuesday, February 8, 2011 9:04 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Alpine RUX-C800 in the language / languages: English as an attachment in your email.

The manual is 11,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Alpine RUX-C800 Manual

Product: