168463
6
Zoom out
Zoom in
Previous page
1/15
Next page
6
ALPINE PMX-F640 68-10872Z46-A (EN/FR/ES)
EspañolFrançaisEnglish
CONNECTIONS
Before making connections, be sure to turn the
power off to all audio components. Connect the yel-
low battery lead from the amp directly to the posi-
tive (+) terminal of the vehicle's battery. Do not con-
nect this lead to the fuse block.
To prevent external noise from entering the
audio system.
Locate the unit and route the leads at least 10cm
(3-15/16") away from the car harness.
Keep the battery power leads as far away from
other leads as possible.
Connect the ground lead securely to a bare metal
spot (remove any paint or grease if necessary)
of the car chassis.
If you add an optional noise suppressor, con-
nect it as far away from the unit as possible. Your
Alpine dealer carries various noise suppressors,
contact them for further information.
•Your Alpine dealer knows best about noise pre-
vention measures so consult your dealer for fur-
ther information.
CONNEXIONS
Avant d’effectuer les connexions, vérifier que tous
les composants audio sont hors tension. Connectez
le conducteur jaune de la batterie provenant de
l’amplificateur directement à la borne positive (+)
de la batterie du véhicule. Ne pas le connecter au
boîtier de fusibles.
Pour éviter que des bruits extérieurs interfèrent
avec le système audio.
Installez l’appareil et acheminez les câbles à au
moins 10cm (3-15/16") de distance du faisceau
de câbles de la voiture.
Eloignez les câbles d’alimentation de la batterie
le plus possible des autres câbles.
Raccordez bien le fil de terre à un point métallique
apparent (enlevez la couche de peinture ou de
graisse si nécessaire) du châssis de la voiture.
Si vous rajoutez un filtre antiparasites en option,
raccordez-le le plus loin possible de l’appareil.
Contactez votre revendeur Alpine pour plus de
détails sur les divers filtres antiparasites
disponibles.
Consultez votre revendeur Alpine pour plus de
détails sur les mesures de prévention contre les
parasites.
CONEXIONES
Antes de efectuar las conexiones, asegúrese de que
apaga todos los componentes audio. Conecte el
cable amarillo de la batería proveniente del
amplificador directamente al terminal positivo (+)
de la batería del vehículo. No conecte dicho cable al
bloque de fusibles.
Para evitar que entre ruido externo en el
sistema de audio.
Coloque la unidad y pase los cables a 10cm (3-
15/16") por lo menos del conjunto de cables del
automóvil.
Mantenga los conductores de alimentación de la
batería lo más alejados posible de otros cables.
Conecte el conductor de puesta a tierra con
seguridad a un punto metálico desnudo (si es
necesario, elimine le pintura o la grasa) del chasis
del automóvil.
Si añade un supresor de ruido opcional,
conéctelo lo más lejos posible de la unidad. Su
proveedor Alpine dispone de varios supresores
de ruido. Solicítele más información.
Su proveedor Alpine conoce la mejor forma de
evitar el ruido. Solicítele más información.
5
2
3
4
(Left Side/Côté gauche/
Lado izquierdo)
1
6
7
(Right Side/Côté
droit/Lado
derecho)
#
!
"
$
%
&
(
)
Fig. 3
89
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpine pmx f640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpine pmx f640 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info